2013 GT500 TVS supercharger

[black99lightnin]

I was told by my local tuner if I make the swap it would be mandatory to have a upgraded heat exchanger.

It wouldn't hurt. I already have one for the heaton.

 

[RI_2011_GT]

Anyone get a price on the elbow DR3Z-9A589-A?

 

[evasive]

I'm thinking of doing it anyway. My installer said with that s/c, CAI, TB and tune I could be at 700rwhp......that seems like its worth doing.

He also said we could work to take off the 5.8 part.

Waiting for tousley to confirm what I need.

Anyone doing this or has done it already what supporting mods did you also do? I've already got a dual fan he going in so, I don't need that. I'll buy the TVS with elbow and gaskets. My concern is do I need a new CAI and TB? If so what are recommended?

I'm installing the VMP 2.4 pulley, 72lb injectors, FORE fuel rails, Ford GT fuel pumps, a FDM, 72mm L&M TB, C&R HE and radiator, and I'm already running the older JLT CF CAI with Amsoil filter and some other stuff.

 

[BLK96NAPWER]

I just had my 13 TVS installed, with VMP 2.4 upper, FR twin 65 throttle body, JLT big air intake and I am hoping for anything over 650rwhp. Still have the stock lower and exhaust with cat protection on in the tune from VMP. I need to get to a dyno after my crazy travel schedule calms a bit.

 

[weebz69]

Ordered mine today from Steve at Tousley Ford.

TVS - $1872.88
Elbow - $204.81

At the time I ordered this morning, his inventory only indicated (2) in Dearborn. He said that I should have mine in hand by the end of this week.

Thanks Steve for the excellent service.

I am really fired up to get this thing installed.

:beer:

Hey I been looking to buy one of these blowers but the price I find is well in the 2k mark. How do I get a hold of this guy Steve at Tousley, is that dealership in MN?

 

[Imatk]

Hey I been looking to buy one of these blowers but the price I find is well in the 2k mark. How do I get a hold of this guy Steve at Tousley, is that dealership in MN?

The price went up a few months ago.

You can get a hold of Steve on these forums under the "Market" section where it shows Vendors.

Or you can just google Tousley Ford and you'll get the phone number, just ask for Steve or Mike R.

 

[weebz69]

I just checked at my ford dealer and it shows the 2013 GT500 TVS supercharger is now available. Ford # DR3Z-6F066-A retail $2837.70 wholesale $2,128.27 and i saw the dealer cost was $1713.00. Ford had 3 in stock in dearborn. Does anybody think this is somewhat of a bolton for the earlier cars?

Yeah I wish I got on the band wagon when I you guys did. I checked with a couple different ford dealerships. Price jumped $3300 retail they'd let it go for $2420. they didn't tell me what dealer cost was. If you can get them any cheaper let me know and where.

 

[ShelbyKid]

Curious as to what dealer cost is on one of the 13' TVS units.

 

[weebz69]

Anyone get a price on the elbow DR3Z-9A589-A?

You can still get the elbow around $205 part number #DR3Z-9A589-A. Comes with the gasket you need. You call a dealership they will say like $370 retail just say you saw it for $205. They will sell it to you for that. Which I think I might do the elbow for now and wait for a used 5.8 supercharger or junk yard one sometime hopefully next year. That way the price doesn't get any more expensive on the elbow.

 

[SuperLX]

Yeah I wish I got on the band wagon when I you guys did. I checked with a couple different ford dealerships. Price jumped $3300 retail they'd let it go for $2420. they didn't tell me what dealer cost was. If you can get them any cheaper let me know and where.

good deal here:

http://www.svtperformance.com/forums/engine-drivetrain-282/876851-f-s-2-3-tvs-2013-shelby.html

 

[GTOGreg]

So you guys buying the 13 TVS don't mind having 5.8 on it?

nah..looks fine

 

[gr850]

Call Steve @ Tousley about M-6066-MSVT23. IMO best deal going at the moment.

 

[evasive]

I just had stiegemeier remove the 5.8, port match the elbow, and paint it black.


2013 TVS powered

 

[slowbra1]

what is the stock pulley size on the 2013 factory tvs?????

2.71

 

[NightRide]

I just had stiegemeier remove the 5.8, port match the elbow, and paint it black.


2013 TVS powered

What was the cost on having that done if you don't mind me asking?

 

[Im1livewire]

2.71

What was the cost on having that done if you don't mind me asking?

+1. Curious as to how this set up works and total cost involved--start to finish.

 

[UNTAIMED]

Hey what is the contact info for the Ford Dealership

 

[Dennis75]

Stock vs TVS

What is the difference between this S/C and the stock 2007? I am new to this stuff

Stock blower on the 07-12 is 1.9 liter, the TVS is 2.3 Liter,

 

[03 DSG Snake]

It's hard to search under TVS. Isn't there a simple fix for the elbow fittings now?

 

[- Aj -]

It's hard to search under TVS. Isn't there a simple fix for the elbow fittings now?

^^^