FRPP TVS Install & Dyno

rjm-1

Member
Established Member
Joined
Aug 24, 2010
Messages
122
Location
Wells, Me.
After installing FRPP TVS, port matched VMP high Flow elbow and 2.5 SS Pulley with Justin's tune, car dyno'd at 632.85 rwhp and 620.75 torque and made just over 17 lbs boost. Numbers were SAE corrected down from actual 647 rwhp as it was a very cool day here in New England. My car has stock injectors and throttle body with FRPP 113mm CAI and stock exhaust. Very happy with results!

Big thanks to Justin at VMP for figuring out I had one of the few FRPP TVS's made in the USA that did not have a tapered snout and supplied me with a pulley that would work on this TVS. Also thanks to Pete at Performance Dyno in Loudon NH for a great dyno session! :beer:
 

2011 gtcs

GT500 poster
Established Member
Premium Member
Joined
Mar 7, 2011
Messages
8,453
Location
Arizona
Nice numbers man, Thats good you can still be on stock fuel with over 600 to the wheels, I want a tvs
 

BlueStarIV

Member
Established Member
Joined
Jul 17, 2007
Messages
91
Location
Pennsylvania
Sweet numbers...and that is some interesting information about the snout of the TVS. I had not heard anything like that mentioned before. I have a FRPP TVS waiting for installation.
 

rjm-1

Member
Established Member
Joined
Aug 24, 2010
Messages
122
Location
Wells, Me.
Sweet numbers...and that is some interesting information about the snout of the TVS. I had not heard anything like that mentioned before. I have a FRPP TVS waiting for installation.

Where did you get your TVS? If you got it from Eddie at Capital Ford in Rocky Mount, NC like me, than you probably have one of the few remaining that was made in the US and will need to select the correct pulley if you want to go smaller. Justin's 2.5 SS Race Pulley will work when pushed 1/8" passed flush.
 

03MUSCLE

03 MUSCLE
Established Member
Joined
Jun 11, 2005
Messages
2,804
Location
San Diego, Ca.
Ive been Rockin a VMP TVS since april......and lovin it!!!!!!!!

PS There never seems to be enough road to really strech her legs......
 
Last edited:

03MUSCLE

03 MUSCLE
Established Member
Joined
Jun 11, 2005
Messages
2,804
Location
San Diego, Ca.
Nice numbers bud...TVS is where the party is at.

Hey Jay, I see you got some 1/4 mile #'s from ATCO. 10.95 Is a great time on 20's that 131mph is haulin ass looks like theres a little more in it. Looks like with my set up maybe i could run a 126-128mph. Hopefully when Cathi get out to CALI we can take em both to the track she's lookin to put a Paxton her 5.0.
 

1320 Junkie

Active Member
Established Member
Joined
Nov 25, 2009
Messages
7,675
Location
CT
Hey Jay, I see you got some 1/4 mile #'s from ATCO. 10.95 Is a great time on 20's that 131mph is haulin ass looks like theres a little more in it. Looks like with my set up maybe i could run a 126-128mph. Hopefully when Cathi get out to CALI we can take em both to the track she's lookin to put a Paxton her 5.0.

Thanks man, was a fun pass.
 

Users who are viewing this thread



Top