Zl1 you are done!!!

HeavyH20

Member
Established Member
Joined
May 20, 2012
Messages
111
Location
Savage, MN
I get flamed every time i say this!!!!! Lol....funny i dont have a SC and have a 6.2L and it only took me a tune (zero bolt ons) to trap over 120....guess its because my car weights 3900lbs vs 4000lbs of the ZL1

A simple CAI and a tune will get you about 120 MPH in the ZL1. I have raced a number of AMG's and they definitely get the work done. The transmission and gearing is certainly optimized for acceleration.

I'm your huckleberry. Live in St. Louis and ony have a few power adding mods. Now I do have suspension, and what not going on the car shortly and would to love to run your full bolt on, ported, pullied, soon to have a cam, ZL1. I have x-pipe, exhaust, intake, a little bit of spray, and a tune. My car is also a stick so you have an advantage there.

Spray would definitely be a bit of an advantage. What jetting? 75, 100? Pre or post boost?
 
Last edited:

kaz109

Well-Known Member
Established Member
Joined
Apr 28, 2007
Messages
6,069
Location
Cali
I love the C63s. (For that matter, any Benz with the 6.2 in it). Your biggest problem is the same that we have on the Cobras- not enough rear tire to lay down the power.

Agreed...in your case its to the extreme though as u are trying to put down much more power that a C63 lol
 

MrSplat

New Member
Established Member
Joined
Nov 5, 2012
Messages
85
Location
Saint Louis
I know baron personally and tried to get him to run on a local forum. Unfortunately, he was already modding his car while I was stock with a tune only. I'd love to run that ZL1 but I can't promise a raping. His car should run well and I have no clue mine will run in the end. Would just like an 11 second pass and nothing break.
 

WSsick

Member
Established Member
Joined
Sep 14, 2008
Messages
497
Location
St. Peters, MO
look here asshat, you and I will be driving and meeting halfway, you're so worried about my "modded to shit 5.0" that you wont even answer the PM I sent you to set up the race.

That meet in KC (Kansas City) doucher mentioned is in March, should be A TON of fast cars out there. Looked it up, OKC to KC is 5 hours. You could whoop on Baron/gt500 slayer's ass and get in a ton of other races. I can assure you the rest of the meet will be worth your time. :)

and a lap dance or two..

I'm surprised no local has come in with a joke about the irony of this post and your supposed stripper wife yet.

I'm your huckleberry. Live in St. Louis and ony have a few power adding mods. Now I do have suspension, and what not going on the car shortly and would to love to run your full bolt on, ported, pullied, soon to have a cam, ZL1. I have x-pipe, exhaust, intake, a little bit of spray, and a tune. My car is also a stick so you have an advantage there.

Mike gimme a holler when this goes down if you need a capable cameraman. :)
 

SILV03MustangGT

Han Brolo CDR 5.Broliance
Established Member
Joined
May 23, 2004
Messages
3,044
Location
Mustang Ok
That meet in KC (Kansas City) doucher mentioned is in March, should be A TON of fast cars out there. Looked it up, OKC to KC is 5 hours. You could whoop on Baron/gt500 slayer's ass and get in a ton of other races. I can assure you the rest of the meet will be worth your time. :)



I'm surprised no local has come in with a joke about the irony of this post and your supposed stripper wife yet.



Mike gimme a holler when this goes down if you need a capable cameraman. :)

Ill be in Virginia for another school then shipping out. Otherwise I would love to come up there a s whoop his ass!!!
 

MyLittlePwny

New Member
Established Member
Joined
Apr 6, 2007
Messages
117
Location
Wichita, Ks
Send all the cobras up to KC in March so I can bust all their asses with a 2 valve. Might just have to settle with gapping a zlwhatever camero
 
Last edited:

Franz

Speed Freak
Established Member
Joined
Jun 11, 2012
Messages
688
Location
Phoenix
Agreed...in your case its to the extreme though as u are trying to put down much more power that a C63 lol

Yes, breaking loose at 60 mph is pretty ridiculous on the OE tires. Can't wait to throw on some Pilot Super Sports and see how much that will tame things.
 

Poppacapp

Active Member
Established Member
Joined
Aug 17, 2012
Messages
2,540
Location
NC
Send all the cobras up to KC in March so I can bust all their asses with a 2 valve. Might just have to settle with gapping a zlwhatever camero

meh... anything can be made fast. I'll throw a GT500 motor in a grocery cart and beat ya. :poke:
 

kaz109

Well-Known Member
Established Member
Joined
Apr 28, 2007
Messages
6,069
Location
Cali
yes breaking loose at 60 mph is pretty ridiculous on the OE tires. Can't wait to throw on some Pilot Super Sports and see how much that will tame things.

Just put mine on a couple weeks ago and i love em! They feel much much more planted, as i tested them out in the canyons just a few days ago. Can't wait to try them on the track. You will love them but for the power you have I would just move up to pilot sport cup. Not sure how wide your stock rims are but the cups start at 295's
 
Last edited:

YD-LUZ

Member
Established Member
Joined
Mar 29, 2012
Messages
33
Location
St Louis, MO
Wow, Baron is everywhere. Good times.

Anyway, the KC meet that has been mentioned end of March has a new date, May 18th. Watching the vid from the last event, it looks like amazing fun.

Looks to me like much more than keyboard racing there,
 

MyLittlePwny

New Member
Established Member
Joined
Apr 6, 2007
Messages
117
Location
Wichita, Ks
I'll be there in my cam only 2 valve if any of you brobras or cameros wanna get drug

736171_10151202682186629_971100284_o.jpg
 

YD-LUZ

Member
Established Member
Joined
Mar 29, 2012
Messages
33
Location
St Louis, MO
That 2v is pretty! Here are my stangs, just mild street cars, I'll likely only bring the red one to the KC event, but may let a buddy play around with the blue one. Better bring your A game.
2058074_600.jpg

2077561_600.jpg
 
Last edited:

Users who are viewing this thread



Top