2013 Steeda Big Bore intake ?

Crowley

Okey doke
Established Member
Joined
Sep 21, 2003
Messages
4,270
Location
Texas
I don't think you will get those gains, but the BLUE filter is a plus!!!

Crowley
 

USV8PWR

Member
Established Member
Joined
Mar 10, 2012
Messages
892
Location
Austin TX
The best looking, most factory looking, CAI out there IMO. And I love the pics of it installed on Devious' car on that website. :rockon:
 

Devious_Snake

PSR Major!
Established Member
Joined
Dec 25, 2011
Messages
9,980
Location
Hell
The gains posted are accurate, I would know they are from my car!

The intake is fine piece, I am running the prototype model. Fitment is good, the enhanced sound from supercharger is a plus! It looks good, no issues thus far using the ram air tube with the heat shield. I have run the car up past 150. The power gains are very noticeable, my car was putting down 660 with the pulley/intake/tune only on their dyno ( base was 580ish)

I would recommend this unit as a great alternative to the other popular models out there. I have been running it for a couple months now and have ran the car hard. No issues and I have given them feedback on any improvements that can be made.
 

spazpilot

New Member
Established Member
Joined
Sep 4, 2010
Messages
150
Location
Carrollton, TX
Devious
Thanks for your input. I've been looking at it mainly because I notice it doesn't require me bending that hood cable tab. My main concern on this one is how close is the MAF harness to the body, if it rubs, and if the final product on the breather tub still requires the hose clamps with a piece of hose or if they fixed it to a grommet push in like the factory one.
 

Devious_Snake

PSR Major!
Established Member
Joined
Dec 25, 2011
Messages
9,980
Location
Hell
Devious
Thanks for your input. I've been looking at it mainly because I notice it doesn't require me bending that hood cable tab. My main concern on this one is how close is the MAF harness to the body, if it rubs, and if the final product on the breather tub still requires the hose clamps with a piece of hose or if they fixed it to a grommet push in like the factory one.

We adjusted mine so there is clearance from the maf to the body. as far as the breather tube, it might be changed. Like I said mine was the prototype. I don't have those specifics for you sorry. It did take a few tries to get the mold and shape right so thats why the fit looks damn near perfect.


Just FYI for everyone, my contact at Steeda is Matt Levine out the pompano beach location. If you want to order, be sure to hit him up and mention me to him. Also the Intake, Shifter and Pulley should be available now. 954-960-0774
 

Users who are viewing this thread



Top