FS: Fully Built IRS & T56 wMGW/RXT/FlowMaster IRS Catback

[Crusher9008]

Ok. So its time that I want to go automatic and solid. Just not running the times I want and i'm wanting to be more consistant. All equipment is still on the car and will be removed as soon as Alternitive Performance can get the car in to start the work. So hears the breakdown.
Complete(Hub to Hub) IRS. A TON of $$$ invested. Asking Price $3,600 + Shipping
-3.73 rear gear
-Low Profile IRS Bolts
All Below Work has been completed by Alternitive Performance(Reciepts available)
-BulletFlow IRS Brace
-Brand new 1k Ford factory fluid and friction modifier(No Leaks)
-Full Tilt and Boogie (FT-5000) Complete Kit
-Full Tilt and Boogie Deluxe Bump Steer Kit w/ Upgraded toe link Kit
-Full Tilt and Boogie all new Cross Axis Joints
-Brand new Ford Racing Bearing(s) in Hubs
-Driveshaft shop PRO-Level Half-shafts(ARP extended studs)
-QA1 Adjustable Shocks
- Will also inlcude the cobra Brakes and all associated hardware

Now for the T-56 Beside the pinion flange, this would be everything you need to bolt in a T56 into your 99-04 Mustang GT, 99/01 Cobra, 03/04 Mach 1 (and probably some other Mustang platforms). Asking $1600 +shipping
-Stock T56 with 41k
-Mcloud 10 spline RXT Clutch(Installed by Alternative Performance) 2k on clutch
-New TOB
-New Reman'ed Pressure plate by McLoud.
-Stock p
-MGW orange handle Shifter w/Shifter Bobs Gasket
-Royal Purple Syncromesh fluid (replaced less then 100 miles ago)

Exuast is a standard Flowmaster catback with Flowmaster 40's.
Asking $250 +Shipping

 

[DBABCOBRA]

Pm sent!!

 

[pickup_man06]

Very nice parts list! I have the same setup done to my IRS, and totally worth the money!! And it saves the new owner the hassle and the time of doing it

 

[SVTORANGE]

Excellent parts are they still available?

 

[x275_eric]

stock input shaft in tranny?

 

[05satinGT]

stock input shaft in tranny?

Says stock transmission and that the clutch is for a 10 spline so I would assume so...

 

[x275_eric]

Says stock transmission and that the clutch is for a 10 spline so I would assume so...

well he made it sound like everything was "built" by his topic. didnt read enough i guess.

 

[Crusher9008]

Sorry just getting back to everyone.. I had my son's birthday party yesterday so I was kinda busy.

All PM's replied too

Tranny is stock with the stock input shaft. I believe I have the tranny sold at asking price.. however i'm making a list of people who are in order who has said they want it. Trans and IRS should be out of the car in a couple of weeks. Alternative Performance is doing all the work and he is pretty busy right now.

And thanks for the bumps. The IRS I took a ton of time and money to get it built as much as possible. Its pretty much bulletproof. I just want to go higher HP and run more consistent times..... funny thing is I had a battle with my buddy that I would never go auto or solid. Look at me now... lol... never say never.

 

[DBABCOBRA]

stock input shaft in tranny?

Bitch, that transmission's mine!
What's up? It's Max.

 

[bakers4v4_6]

dang I just bought this almost exact set up from another member but you would have beeen much closer to pick up... Owell well bump for a nice set up

 

[Crusher9008]

dang I just bought this almost exact set up from another member but you would have beeen much closer to pick up... Owell well bump for a nice set up

Dang... Man I wish you had waited... lol.. if you dont mind me asking how much did you pay for your set-up?

Thanks for the bump

 

[Crusher9008]

Fyi t56 has been sold.

 

[ctgreddy]

did you sell the rxt? I'd buy that for the right price and am local would be able to pick up.

 

[DBABCOBRA]

Fyi t56 has been sold.

:banana::banana::banana::banana::banana::banana::banana::banana::banana:

 

[Crusher9008]

did you sell the rxt? I'd buy that for the right price and am local would be able to pick up.

Sorry bud the trans is being sold as a whole as well I'm getting a 4R75 out of a Mach.