One Touch Down Modules

mach1197203

Dr Frankenstein
Established Member
Joined
Apr 1, 2010
Messages
255
Location
The corner of crazy and looney
Ok boys and girls, I'm getting ready to make a large buy on module and pigtails but I need to know how many people are seriously interested in kits. PM me so I can put you on the list and how many you are wanting.
 

LDC2335

Active Member
Established Member
Joined
Feb 26, 2009
Messages
2,001
Location
USA
Do you have a wiring guide on how to make it work for a convertible top? One touch top would be nice.
 

idhitit

Member
Established Member
Joined
Nov 25, 2004
Messages
622
Location
Las Vegas
Id like the one touch top and does the kit allow for all the windows to go down at once for the vert dudes? That would be bad ass if it does.
 

mach1197203

Dr Frankenstein
Established Member
Joined
Apr 1, 2010
Messages
255
Location
The corner of crazy and looney
One kit is needed for each window so for the verts you would need three additional kits on top of the one that is already wired into the car for the drivers window from the factory. The vert top I hope to have available soon. If you want a kit or three for the Windows in the mean time PM me with details on your car and I will send you my PayPal info.
 

idhitit

Member
Established Member
Joined
Nov 25, 2004
Messages
622
Location
Las Vegas
One kit is needed for each window so for the verts you would need three additional kits on top of the one that is already wired into the car for the drivers window from the factory. The vert top I hope to have available soon. If you want a kit or three for the Windows in the mean time PM me with details on your car and I will send you my PayPal info.

How large is the module and where does it go? Do you have any install pics?
 

mach1197203

Dr Frankenstein
Established Member
Joined
Apr 1, 2010
Messages
255
Location
The corner of crazy and looney
I dint have any installed pics but it just fits behind the door panel by removing the door cup plastic and you just put it down in the small cavity between the door panel and door shell. It is only about 3"x1.5"x 2.5" approximately. The rear ones will take a little more as you do have to pull some interior pieces to install it behind the rear trim
 

Goindeafonmtx

Well-Known Member
Established Member
Joined
Jan 31, 2006
Messages
1,629
Location
Evansville, IN
Fwiw, I put modules on all three windows of the girlfriends vert worked like a charm. Im going to do up function as well. I already did it in my F250. I attempted the convertible top, up and down functions. I couldn't get it to work. I'm not any kind of electrical engineer, but I think the hydraulic motor draws too much current and trips it off immediately.

FYI, I didn't buy my modules from you.
 

mach1197203

Dr Frankenstein
Established Member
Joined
Apr 1, 2010
Messages
255
Location
The corner of crazy and looney
That's the same Damn problem I ran into. I was trying to upgrade a couple of pieces on the circuit board inside of it to help with that but I lost got pissed off with it and have just let it sit on my work bench. Looks like there is a bigger interest in it then I had originally thought. I'm starting to work on it again to try and figure something out for it. I still have a few kits available if you are needing some for your up's.

FYI, I didn't buy my modules from you.[/QUOTE]
 

ltsvterminator

New Member
Established Member
Joined
Dec 26, 2011
Messages
6
Location
matamoros
hi what does this kit does?? as i understand this kit will get atm down also the passenger side window or am i wrong?? if it so i want one kit

pm
 

LDC2335

Active Member
Established Member
Joined
Feb 26, 2009
Messages
2,001
Location
USA
hi what does this kit does?? as i understand this kit will get atm down also the passenger side window or am i wrong?? if it so i want one kit

pm
On the sn95 mustangs and cobras, only the driver's side window has the one touch auto down feature. This kit installs on the passenger side to allow that feature over there.

I have installed one of his kits and it's great. You'll wish you had done it sooner.
 

Users who are viewing this thread



Top