Oil catch cans

[mrpork]

Need to get a good one. Need some good advice on which one would be best for our cars. looked at Bob's, UPR and JLT.

 

[07 Black Beauty]

Most go with Bob's, I run the JLT on my 14 and seems to catch a good amount of oil.

 

[TVS VERT]

Just removed a JLT Oil Inducer from my car when I seen the oil that was in my intercooler didn't do squat .... replaced it with a UPR setup and it's been dry ever since

 

[mrpork]

anyone else?

 

[1971mach1]

anyone else?

I have a JLT catch can and track my car 6-8 times a year plus auto cross a full season, I am happy with my JLT.

 

[03 DSG Snake]

Bob's

 

[tj@steeda]

+1 for Steeda with forum discount

https://www.steeda.com/steeda-mustang-oil-separator-555-3711.html

 

[Snoopy49]

+1 for Steeda with forum discount

https://www.steeda.com/steeda-mustang-oil-separator-555-3711.html

How does your catch can differ from this air filter, Amflo 3000-RET Mini-Air Fiter 1/4"NPT Port & Poly Bowl, other than the fittings? Are the fittings plastic or metal?

 

[blue 07]

Check out the new JLT 3.0. Just bought and installed one after hearing great reviews from many.

 

[1 Alibi 2]

Run a Jegs separator on both cars.
......JLT told me how bad they were.........................6 years ago !!
.

 

[fearthesnake]

Run a Jegs separator on both cars.
......JLT told me how bad they were.........................6 years ago !!
.

Alibi- love those Ford Racing Engine Caps and Valve cover plates. Looks like a nice touch to do next myself.

 

[Burlybear]

Very happy with my Bob's oil separator

 

[djniknala]

I run a Bob's on passenger side and JLT on the drivers side. I was still getting oil in the intake when I took it apart to port match everything. Put another JLT in after the Bobs on the passenger side and so far it's been clean. These cars produce a lot of blow by when you pulley them down. I also put a CFM breather in place of the oil fill cap when the PCV gets over run. This is purely anecdotal so take it as you will.


2014 GT500 Sterling Gray Metallic Black stripes Base w/NAV ATI 10% OD Damper w/ Gates blue belt, BPS ported elbow, VMP 67mm TB, 123 mm JLT color matched intake, TR7IX at .028, Ngauge with Lund tune all thanks to Van at Revan Racing.

 

[tomshep]

Running Bob's on the passenger side only. Watch for sale ads.

Tom

 

[BrunotheBoxer]

JLT on passenger side only.

 

[Norton]

Running Bob's on the passenger side only. Watch for sale ads.

+1.

 

[03cobra#694]

TTT

 

[blue 07]

I run a Bob's on passenger side and JLT on the drivers side. I was still getting oil in the intake when I took it apart to port match everything. Put another JLT in after the Bobs on the passenger side and so far it's been clean. These cars produce a lot of blow by when you pulley them down. I also put a CFM breather in place of the oil fill cap when the PCV gets over run. This is purely anecdotal so take it as you will.


2014 GT500 Sterling Gray Metallic Black stripes Base w/NAV ATI 10% OD Damper w/ Gates blue belt, BPS ported elbow, VMP 67mm TB, 123 mm JLT color matched intake, TR7IX at .028, Ngauge with Lund tune all thanks to Van at Revan Racing.

Any oil mist etc from running the CFM breather ?

 

[djniknala]

Any oil mist etc from running the CFM breather ?

No none at all.

 

[mrpork]

looks like I'll be getting a upr oil can.