I will certainly give you that, but add that you're a brave man putting that power through those tiny pizza cutters on the back. How wide can that rim be, 7" or 8" wide at the very most?
Just another coyote swap
- Thread starter flatheadford
- Start date
Have you looked into the Volvo electric hydraulic pump as a hydro boost alternative?
- Joined
- Mar 11, 2017
- Messages
- 23
I actually have no idea but I’m thinking I can fit a small drag radial on the back, I’ve seen a guy fit 275 drag radials on ten hole wheels. If I can’t I have some 4 lug steelies I can widen if needed while using some cheap hubcaps. I’m definitely not buying a drag setup for it anytime soon
Sent from my iPhone using the svtperformance.com mobile app
- Joined
- Mar 11, 2017
- Messages
- 23
I have not. Would it clear the engine and how hard is it to modify to fit ?
Sent from my iPhone using the svtperformance.com mobile app
Go to the coyote swaped foxbodies page on Facebook, then search for Volvo in all the posts. Chase Kilgore and Brandon Ellis both have posts with that electric Pump
- Joined
- Mar 11, 2017
- Messages
- 23
Here’s a little update for the swap. I took the oil pan off and checked everything, it looks amazing. Also that thing I said about budget build... not happening anymore. I ordered a set of comp stage 2 cams, billet crank sprocket, and a 2018 gt intake, and already have billet oil pump gears. It’s not on a small budget now... just waiting on everything to come in.
Sent from my iPhone using svtperformance.com
Sent from my iPhone using svtperformance.com
- Joined
- Mar 11, 2017
- Messages
- 23
love a good budget coyote fox build. I saw something about keeping it 4 lug and also using the SN95 stuff. With all this new found power, are you going to use the sn95 disc brakes? Id hope that as a minimum as more GO needs more WHOA. Keep the pics coming! That sleeper will def be hurtin some feelings.
- Joined
- Mar 11, 2017
- Messages
- 23
Yeah I’m going the hydroboost route so I may end up doing 5 lug with some steelies or something, still undecided. I’m definitely not keeping drums in the back no matter which way I go with it.
Sent from my iPhone using the svtperformance.com mobile app
- Joined
- Mar 11, 2017
- Messages
- 23
- Joined
- Mar 11, 2017
- Messages
- 23
Well the 2018 intake showed up! All I’m waiting for now is my comp stage 2 cams to show up and then the assembly will begin!
Sent from my iPhone using svtperformance.com
Sent from my iPhone using svtperformance.com
- Joined
- Mar 11, 2017
- Messages
- 23
- Joined
- Mar 11, 2017
- Messages
- 23
Alright so I have been way off with trying to update this thread.. I have been working towards a new job and it’s taking all my time, however progress is still being made, just a little slower! I talked with Todd Warren on Facebook about cams and my goals and I ended up going with comp stage 3 cams. Also got the intake mocked up. Remember, just a little at a time!
Sent from my iPhone using svtperformance.com
Sent from my iPhone using svtperformance.com
- Joined
- Mar 11, 2017
- Messages
- 23
Users who are viewing this thread
