03-04 tank venting

old01cobra

Active Member
Established Member
Joined
Aug 27, 2012
Messages
257
Location
IL
Installing a baffled tank that only has the fuel fill vent line port on the top hump. New edge cobra BTW. Just curious how you guys vent your tanks without the EVAP hole/line etc on these. If anyone has some pictures for some ideas that would be awesome. Setting up a return style fuel system.

Thanks guys.
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,811
Location
El Paso, TX
Man. I don't know how you aren't going to get a bunch of fumes without the evap system hooked up. I run a cell in my old CJ5 but those things are supposed to stink like gas. Plus it has a bikini top with no doors.
 

blackdak318

New Member
Joined
Oct 27, 2009
Messages
2
Location
Omaha, NE
I installed a -6 roll over valve in the stock vent location and my fuel pumping issues went away. Mine is just open to air so you do have to be careful filling the tank. They also make them with a connection so you could coil some fuel line if you had a concern.
 

biminiLX

never stock
Established Member
Premium Member
Joined
Jan 17, 2003
Messages
13,275
Location
Toledo, OH
I’m doing a Coyote/Cobra IRS swap in a Fox, and I just picked up a stock ‘03-04 tank. It comes with all the hoses, etc
I plan on a dual pump hat and return, but any problem keeping the stock tank venting?
-J
 

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,811
Location
El Paso, TX
I’m doing a Coyote/Cobra IRS swap in a Fox, and I just picked up a stock ‘03-04 tank. It comes with all the hoses, etc
I plan on a dual pump hat and return, but any problem keeping the stock tank venting?
-J

The system is sealed, no venting. It'll detect a leak down to some ridiculous level.

I can't even imagine what a pain in the ass it would be to hook it up like stock but that would be best.
 

old01cobra

Active Member
Established Member
Joined
Aug 27, 2012
Messages
257
Location
IL
I never started it this year. Got everything done minus the harness running to the two pumps. Im lazy and a fail lol.... My problem was they the tank with the 03-04 baffels in it only had one hole in the top. I swapped the smaller vent on the top over the little blue one from the 01 tank to this one. The hole for the white vent was missing. Hopefully it vents on its own. Mustang tanks aren't that sealed anyway especially with that goofy grommet for the filler neck lol. It stinks it stinks ohhh well...
 

Users who are viewing this thread



Top