2018 Procharged Mustang GT at WannaGoFast Ocala

pierce88

Active Member
Established Member
Joined
Jul 22, 2014
Messages
198
Location
Tampa, Florida
Hey guys! Thought I'd give everyone an update on the new mustang I got after selling the Shelby since some people seemed to like my 1/2mi Racing videos from the past.

I sold my 2013 GT500 back in November and picked up a 2018 Fury Orange GT Premium (Digital Dash) 10r80 car. Well we added a procharger D1X along with a bunch of supporting modifications over the last month and this was the result. 168mph+ in the 1/2mi! The best I ever managed with my 2013 GT500 was 152mph which was actually with Just an Intake and Tune. Once I started modifying that car for drag racing (3.73 gears) it actually slowed down in the 1/2mi despite adding almost 100whp.

Mod List and Videos below! Hope this gets some of you excited to give these events a shot as it is a ton of fun! Videos were created with HPTuners Overlay Software and is generated from the .csv Datalog file (Pretty easy to align if you just click log and then start video immediately, works about to almost exactly a 1 second lag every time)

GT350R in photo is a Built Sleeved Motor with Procharger F1A-94 that went 184mph (Owned by Coastal Chassis Dyno in Tampa)!

2018 GT Premium 401A (FULL WEIGHT, 200lb Driver)
10r80
Orange Fury
e85 (Thorton's Tested 83-85%)

Modifications:

HP Tuner Ngauge - Remote Tune by Palm Beach Dyno (GO ROB)
Procharger D1X Stage 2 with Race Red BOV
ARH 1 7/8th Long Tubes
ATI Balancer
ID 1050x
DW400
JMS BAP
UPR Catch Can
NGK Plugs
Boundary OPG
Boundary CS
ATI Crank Bolt
Viking Crusaders
BMR Drag Springs
BMR Spherical Lower Control Arm Bearing (BK081)
BMR Vertical Links (TCA048)
BMR Cradle Bushing Lockout (CB010)
Ford Racing G-Force Half-Shafts
Forge Star F14 17x10 with 275/40r17 ET Street R




3-Wide.jpg


Split-Photo.jpg


Time-Slips-Labeled-with-Data-Log-Number.jpg
 

gimmie11s

I Race Pontiacs
Established Member
Premium Member
Joined
Jun 1, 2004
Messages
18,488
Location
la la land
Impressive. How does it run in the 1/4 and how much power is it making?

I'd love to do a 1/2 mi event.
 

pierce88

Active Member
Established Member
Joined
Jul 22, 2014
Messages
198
Location
Tampa, Florida
Impressive. How does it run in the 1/4 and how much power is it making?

I'd love to do a 1/2 mi event.


No 1/4mi times yet. Planning to head to Bradenton For Runday Sunday on 4/28 to give it a shot.

Ran 11.2@123 with just long tubes and e85 (went 148mph in the 1/2mi with those mods)

Not sure on WHP as it was remote tuned using data logging and pulls. My guess is somewhere around 750whp

-Pierce


Sent from my iPhone using Tapatalk
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
Hey guys! Thought I'd give everyone an update on the new mustang I got after selling the Shelby since some people seemed to like my 1/2mi Racing videos from the past.

I sold my 2013 GT500 back in November and picked up a 2018 Fury Orange GT Premium (Digital Dash) 10r80 car. Well we added a procharger D1X along with a bunch of supporting modifications over the last month and this was the result. 168mph+ in the 1/2mi! The best I ever managed with my 2013 GT500 was 152mph which was actually with Just an Intake and Tune. Once I started modifying that car for drag racing (3.73 gears) it actually slowed down in the 1/2mi despite adding almost 100whp.

Mod List and Videos below! Hope this gets some of you excited to give these events a shot as it is a ton of fun! Videos were created with HPTuners Overlay Software and is generated from the .csv Datalog file (Pretty easy to align if you just click log and then start video immediately, works about to almost exactly a 1 second lag every time)

GT350R in photo is a Built Sleeved Motor with Procharger F1A-94 that went 184mph (Owned by Coastal Chassis Dyno in Tampa)!

2018 GT Premium 401A (FULL WEIGHT, 200lb Driver)
10r80
Orange Fury
e85 (Thorton's Tested 83-85%)

Modifications:

HP Tuner Ngauge - Remote Tune by Palm Beach Dyno (GO ROB)
Procharger D1X Stage 2 with Race Red BOV
ARH 1 7/8th Long Tubes
ATI Balancer
ID 1050x
DW400
JMS BAP
UPR Catch Can
NGK Plugs
Boundary OPG
Boundary CS
ATI Crank Bolt
Viking Crusaders
BMR Drag Springs
BMR Spherical Lower Control Arm Bearing (BK081)
BMR Vertical Links (TCA048)
BMR Cradle Bushing Lockout (CB010)
Ford Racing G-Force Half-Shafts
Forge Star F14 17x10 with 275/40r17 ET Street R




View attachment 1566700

View attachment 1566701

View attachment 1566702
Darn impressive! The paint color alludes to the nature of your beast. FURY!
upload_2019-4-16_19-33-50.png
 

Users who are viewing this thread



Top