03 Cobra - Custom Cams & Whipple Crusher Gen 4 - Dyno

Intervention302

Well-Known Member
Established Member
Joined
Jul 16, 2010
Messages
2,994
Location
NH
Making this new Whipple 2.9 Crusher Gen 4 do some work

2.9L Whipple Crusher Gen4
Todd Warren Custom Grind Cams
BTR Valve Springs
ARP 2000 rod bolts and head studs
TSS Oil Pump
Stock compression, rods, pistons, and crank

Crusher Intake with 123mm Gt500 MAF
Fore twin 465s with ID1300x2
ARH 1-3/4, 3" X-Pipe, 2.5" Magnapacks
Mcleod RXT1200












5ef55079a3de43260552a0684f320e79.jpg
 
Last edited:

MG0h3

Well-Known Member
Established Member
Joined
Jul 23, 2014
Messages
13,685
Location
El Paso, TX
Damn. I know the factory stuff is stout but can’t say I’ve seen anyone go that far on it. Pistons anyways. Unopened bottom end right?


Sent from my iPhone using svtperformance.com
 

Intervention302

Well-Known Member
Established Member
Joined
Jul 16, 2010
Messages
2,994
Location
NH
Damn. I know the factory stuff is stout but can’t say I’ve seen anyone go that far on it. Pistons anyways. Unopened bottom end right?


Sent from my iPhone using svtperformance.com
Sort of.

We put rod bolts, but that's it.


Stock rods, pistons, crank, compression

Sent from my SM-G975U using Tapatalk
 

PC03GT

Well-Known Member
Established Member
Joined
Sep 8, 2010
Messages
2,391
Location
delaware
Sort of.

We put rod bolts, but that's it.


Stock rods, pistons, crank, compression

Sent from my SM-G975U using Tapatalk
You're probably right at the sweet spot. My buddy had the hellion hellraiser kit on his 03, making 1000+ on e85 and meth. He ended up lifting a head from so much boost
 

BlckBox04

I am the liquor
Established Member
Premium Member
Joined
Dec 24, 2007
Messages
8,496
Location
NJ
So in your honest opinion, excluding the fact you were just in the mood to mod, were the cams worth it?
 

Intervention302

Well-Known Member
Established Member
Joined
Jul 16, 2010
Messages
2,994
Location
NH
You're probably right at the sweet spot. My buddy had the hellion hellraiser kit on his 03, making 1000+ on e85 and meth. He ended up lifting a head from so much boost
If I lift a head with ARP 2000 holding it together, I quit haha.
Wholly shite.
Indeed
She is mean
Damn nice set up
Thanks man
Ohhh. This is the dyno sheet I saw on instagram the other day.
Yeah the graphs leaked before I finished editing the video.

I uploaded in 4k60 so it damn well took a while
Congrats man, the car has to feel crazy now.
Yeah it's honestly pretty scary. I haven't driven anything north of 600 in a long time.

It will be less scary when I get it aligned

Sent from my SM-G975U using Tapatalk
 

Jefe

Well-Known Member
Established Member
Joined
Mar 24, 2006
Messages
18,443
Location
AZ
Sounds amazing and thats the cleanest engine bay Ive seen in a long time. Looking forward to more driving videos
 

Weather Man

Persistance Is A Bitch
Established Member
Joined
May 18, 2012
Messages
25,764
Location
MN
If those are the stock wrist pins, you are definitely pushing them.
 

Intervention302

Well-Known Member
Established Member
Joined
Jul 16, 2010
Messages
2,994
Location
NH
Sounds amazing and thats the cleanest engine bay Ive seen in a long time. Looking forward to more driving videos
It's clean. But I wouldn't go that far
. There are definitely more impressive bays out there
If those are the stock wrist pins, you are definitely pushing them.
Stock sir

Sent from my SM-G975U using Tapatalk
 

Users who are viewing this thread



Top