13-14 GT500 Coolant and Intercooler Tanks from Revan Racing. Like New PowderCoated Black

jd-hart

Member
Established Member
Joined
Dec 10, 2011
Messages
114
Location
Randleman, NC
Bought new from Van. Coolant and Intercooler. Powdercoated Piano Black. For 13-14 GT500. $250 shipped.
IMG_1399.jpg
IMG_1401.jpg
 

OKSnake08

Member
Established Member
Joined
Aug 8, 2019
Messages
47
Location
Tulsa,OK
Ugh too bad they won’t fit 7-9 otherwise you’d have my money GLWS the price is great somebody will scoop them up soon !
 

Robert M

800 HORSE FUN!!
Established Member
Joined
May 15, 2003
Messages
9,157
Location
Sunny, Fla.
Ugh too bad they won’t fit 7-9 otherwise you’d have my money GLWS the price is great somebody will scoop them up soon !

OP - Sorry to butt into your sale. Actually those 2013/14 tanks will fit the 2007-2012, shown below is the 2013/14 IC tank in natural alum and in Black, both are C&R brand, same as Van sells. The alum. tank has the 2013/14 oem bypass hose installed and the Black tank has the oem 2007-2012 hose installed. It is hard to tell from the picture angle, but both hoses end up in the same place at the intercooler nipple on the front of the lower intake. The nice thing about using the 2013/14 I/C tank on the 2007-2012 is that you do not have to cut that expensive GT500 specific upper I/C hose because the nipple is located up under the tank and the oem hose reaches to that point like it did on the oem small/plastic tank, as shown below.....

033.jpg


^^^The lower/outlet nipple on this 2013/14 reservoir will require whatever is required or not required for install on the 2007-2012.....and that would probably be the same on the correct 2007-2012 I/C tank.

R

OP - Sorry again for butting in.....
 
Last edited:

Robert M

800 HORSE FUN!!
Established Member
Joined
May 15, 2003
Messages
9,157
Location
Sunny, Fla.
Lol. I literally just bought these after reading your extensive write up over on fordgt500.com. Thanks Robert!

You are welcome, they were a good deal and many people have not seen the 2013/14 tanks for a stare and compare with the oem 2007-2012 and 2013/14 upper hoses.

R
 

OKSnake08

Member
Established Member
Joined
Aug 8, 2019
Messages
47
Location
Tulsa,OK
Well that didn’t work out too well for me , but armed with new knowledge so not a total loss. Really liked some info I read from Roberts old post about “the tank” so the hunt continues.....
 

Robert M

800 HORSE FUN!!
Established Member
Joined
May 15, 2003
Messages
9,157
Location
Sunny, Fla.
Well that didn’t work out too well for me , but armed with new knowledge so not a total loss. Really liked some info I read from Roberts old post about “the tank” so the hunt continues.....

That was a sad time......"The Tank" install. I really liked that unit, it looked Great but after getting everything in place and looking nice, I put my original billet Super Snake gaps on the top and the S/C side hit the bottom of my Super Snake hood!!

I tried lowering The Tank in the mounts, but could never get it low enough. Filing on my billet Super Snake cap to gain clearance was not an option, making clearance in the fiberglass on my original Super Snake hood was not an option..............So, that was the end of that and it went to a new owner.....

R
 

Users who are viewing this thread



Top