Official Terminator Picture Thread

Skitzerman

NE Philly
Established Member
Joined
Feb 12, 2006
Messages
5,113
Location
Philadelphia Pa.
I really like those CF side skirts, been looking at those for a long time, but I would catch HELL every time I'd have to lift my car for some work?


I have the Carbon Driven Fiberglass Side Skirt Splitters. The car is sitting on a 3/4" thick rubber mat. A low profile jack fits under there, no problem.

ad1b6d9e-2f3f-4f08-b2d6-712f414288b2_zpskobv82la.jpg
 

Stage 4.6

Well-Known Member
Established Member
Joined
Dec 31, 2010
Messages
2,074
Location
Colorado
I have the Carbon Driven Fiberglass Side Skirt Splitters. The car is sitting on a 3/4" thick rubber mat. A low profile jack fits under there, no problem.

View attachment 1695793

Those look good bud, Is your car lowered? I can barely get my low profile jack under my car even after rolling it up on a 1x6 piece of wood, and when I do the very end part of the jack where the handle connects, barely clears the skirt?
 

Skitzerman

NE Philly
Established Member
Joined
Feb 12, 2006
Messages
5,113
Location
Philadelphia Pa.
Which springs, looks lower than the H&R race i'm using. All isolaters in? Stance looks great!!!

I tried after market springs, one set was higher than I wanted, another set slammed her. I ended up cutting my springs four times, until I was satisfied with the drop. Cut a coil and 1/8 off the rear and 7/8 of a coil in the front. I also put urethane Iso's in top and bottom, front and rear. IMO, the handling got a little better and the ride quality is that of a rough riding New Edge Mustang, which they always were.
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
Great photo of your Cobra, Vince. The wheels are perfect with the SB paint. Had you just washed it in that photo. I can see that the tires are coated. Nice!
 

Stage 4.6

Well-Known Member
Established Member
Joined
Dec 31, 2010
Messages
2,074
Location
Colorado
Yes, she is lowered about an inch.
Wow and you can still get a jack under there?

I tried after market springs, one set was higher than I wanted, another set slammed her. I ended up cutting my springs four times, until I was satisfied with the drop. Cut a coil and 1/8 off the rear and 7/8 of a coil in the front. I also put urethane Iso's in top and bottom, front and rear. IMO, the handling got a little better and the ride quality is that of a rough riding New Edge Mustang, which they always were.

I have H&Rs uncut and no ISOs up front, last year I added ISOs in the rear just the lower perch cause when ever I hit a dip at high speeds fender would rub on my tires. My fender are not rolled and I run a 305-35 -18.

I really do want those CF skirts.
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT

Skitzerman

NE Philly
Established Member
Joined
Feb 12, 2006
Messages
5,113
Location
Philadelphia Pa.
No harm, no foul Bob, a lot of folks have a problem with identifying that color. Most of Ford's metallic blues have a tendency to change colors. My Vista Blue 2010 Ranger looks Sonic Blue is certain sun light. And yes, I do feel very fortunate to be the original owner of this car, 17 years moving forward.
 

CobraBob

Authorized Vendor
Established Member
Premium Member
Single Barrel Sirs
Joined
Nov 17, 2002
Messages
105,349
Location
Cheshire, CT
You can use any online storage/hosting service; some you pay for and others are free. You can also do a copy/paste, which is what I usually do. Find the photo either on your hard drive or with Google. Use the COPY function. Then go to your thread and PASTE.
 

RedfireSVT

Well-Known Member
Established Member
Joined
Oct 23, 2005
Messages
4,824
Location
Texas
Thanks Bob! Just like old times, glad to see you're still on here, been a while for me.
You can use any online storage/hosting service; some you pay for and others are free. You can also do a copy/paste, which is what I usually do. Find the photo either on your hard drive or with Google. Use the COPY function. Then go to your thread and PASTE.
 

Users who are viewing this thread



Top