Got the BCForged installed. My next items are to put the front sway bar back on, figure out why it sits so high despite having HR Race Springs
Sent from my iPhone using the svtperformance.com mobile app
NEED HELP PLEASE!
- Thread starter NotSatisfied
- Start date
Got the BCForged installed. My next items are to put the front sway bar back on, figure out why it sits so high despite having HR Race Springs
Sent from my iPhone using the svtperformance.com mobile app
H and R race springs do sit higher than the Sports if I’m not mistaken. I could be way off.
those wheels definitely work with that car
Congrats again on all your work. Sir, that's a bitchin' ride.
Yes, they really do. That Cobra is a real stunner!!! The paint pops! Wheels pop! Motor and everything else pops!
They do, but that rear wheel gap looks a little on the large side to me.
Agree I’m working on it but don’t know where to start
Sent from my iPhone using the svtperformance.com mobile app
I have these springs. I only run the bottom isolator and it has a good stance.
No added noise for me.
A number of Cobra owners have gone the bottom isolator-only with no issues. I would definitely give it a try.
So I am reading (via Search) ALOT about spring orientation. Seems like its a big deal to some. If the springs are not oriented the same (or properly for that matter)- it would affect ride height? I have my PN's facing outwards on each side but the majority of pictures I see of these springs installed, you can not see PNs.
Post #5
Post #5
What's the proper H&R Race spring orientation?
I searched but didn't find anything conclusive. What is the proper rotational position for rear H&R Race Springs? Looking down from the top of the car with 12pm on the clock being at the front of the car, where should the lower end of the spring coil (the pigtail) be positioned on the...
www.svtperformance.com
Does H&R print them on the same side every time? I feel like mine are facing outwards, but can't check until I get home from work. I've got top and bottom iso's reinstalled on mine and it still doesn't sit nearly as high as yours.
Possibly a dumb question/point:
Based on the pic and how clean the tires are, I'm guessing the pic was taken right after the car was set back down. Will it settle once you release the handbrake and let it roll a bit?
Possibly a dumb question/point:
Based on the pic and how clean the tires are, I'm guessing the pic was taken right after the car was set back down. Will it settle once you release the handbrake and let it roll a bit?
Last edited:
I doubt it these springs were on the car when i bought it, they have been there some time already. The rear was high before the tire install.
Removed the isolators and put heater hose on bottom. Gawd I nailed it!
Sent from my iPhone using the svtperformance.com mobile app
Looks very good! Good job
Very sweet ride, great work, nice to folks still working on their 20 year old cars
Car looks absolutely amazing man.
Also glad to see you stayed with no rear bumper inserts.
Also glad to see you stayed with no rear bumper inserts.
Honestly contemplating it. I have the half letter ones and considering the outline ones.
Sent from my iPhone using the svtperformance.com mobile app
Users who are viewing this thread
