tech help

[SVTGT]

does anyone have a decent list of the parts required for a turbo swap for a 03/04 cobra. anyinfo would be help.

 

[03 Whippled Cobra]

Directly from Hellion's website:

99-01 Alternator #YR3210346AA
Alternator Bracket #XR3Z-10153-AB
99-01 Cobra Intake (Lower) #YR3Z9424BA (Upper) #XR3Z9424AA
99-01 Serpentine Belt #4060980 ^ 6PK2490
99-01 Throttle Cable Bracket & Cable Bracket # XR3Z9728CA Cable #1R3Z9A758CA
Alternator Wires to extend . pigtail #1U2Z14S411UA
*If keeping EGR is desired, need 99-01 EGR tube # XR3Z9D477DB

This doesn't include the turbo kit itself or the k-member and suspension parts you might need depending on the kit you buy. Also fuel upgrades to support the power.

 

[EvilTwins]

Directly from Hellion's website:

99-01 Alternator #YR3210346AA
Alternator Bracket #XR3Z-10153-AB
99-01 Cobra Intake (Lower) #YR3Z9424BA (Upper) #XR3Z9424AA
99-01 Serpentine Belt #4060980 ^ 6PK2490
99-01 Throttle Cable Bracket & Cable Bracket # XR3Z9728CA Cable #1R3Z9A758CA
Alternator Wires to extend . pigtail #1U2Z14S411UA
*If keeping EGR is desired, need 99-01 EGR tube # XR3Z9D477DB

This doesn't include the turbo kit itself or the k-member and suspension parts you might need depending on the kit you buy. Also fuel upgrades to support the power.

And don't forget the Driveline/IRS upgrades as well!

 

[TRBO VNM]

boost controller as well and tuning...

but for just the swap, the second post answers it and some parts may depend on the kit you go with. and the EGR isn't a requirement for the kit, just an option if you want to retain it.

 

[SVTGT]

Truth be told. the drivetrain is in a foxbody that i set up for road racing. it have a full maximum motorsports front suspension and the irs/T56 will be upgraded accordingly. and the engine is being conrtoled by a Big Stuff 3

 

[TRBO VNM]

you will need a different kmember if you go with the hellion kit, unless you bought the hellion/MM version. Or unless you are planning a custom kit, which sounds like you might be. should be a great project and car when done.

 

[SVTGT]

ya it will be quite the custom kit the plan was originally for a big twin screw but my buddys TT WS6 changed my mind.

 

[Woodys2000]

Good luck man IMO there is nothing like a sick Foxbody!!