Awesome Jason... big congrats buddy!
MACA 1/4 mile ET/MPH stats
- Thread starter Antex
- Start date
thanks folks!
The rest of the passes (10 total) all preceeded by 11 no particual order:
.124
.153
.171
.189
.207
.305
.450
.589
.834
The rest of the passes (10 total) all preceeded by 11 no particual order:
.124
.153
.171
.189
.207
.305
.450
.589
.834
That's a heckuva day Jason!!!!
Damn, very nice man. Whats the current setup?
Haven't done a power adding mod since I moved to MD over 2 years ago.
2.8
prochamber
maggie catback
RWTD tune
JLT RAI
Solid rear, DFX, junk granatelli control arms, stock 96 GT springs and shocks
Just added the coil overs and strange adjustable struts.
And I guess you can say the big and littles are a power adding mod by removing rotating weight.
And Dwight no port ... just don't have the money to do the supporting mods for the ported blower! And the weight yesterday was only 15 lbs lighter than when I ran the 11.37. I think when I ran those numbers I was just guessing at the race weight. I had since weighed the car in the same trim at another track and it was 3480 with me in it.
Thanks for the props guys!
Last edited:
No Such Luck........................11.42 @ 124.03_ 1.75 _ _ 03 _ _ _ _ _ Whipple 3.25 upper only_ _ _ _ _ _ _ _solid _ _ 3.73 _ _ SL _ - (3940)
Thanks!
Thanks!
Last edited:
Mr. Textier, can you please edit the master 1/4 mile list to include my best run today at Mason Dixon? Same mods as previous.
10.99 @ 130.39....1.63.....03........Ported Eaton 2.90/6lb........IRS.......3.55
10.99 @ 130.39....1.63.....03........Ported Eaton 2.90/6lb........IRS.......3.55
Oh s^%t. Very nice! Good air up there today?
11.88 @ 123.56 1.85 60 ft.
2.80 upper only, no port. 6 speed, IRS, 3.55's.
2.80 upper only, no port. 6 speed, IRS, 3.55's.
Nice job! Unfortunately, you have to be a member of the MACA to be included in this 1/4 mile list.
move me on up Matt! 9.92...137.83mph 1.47 60ft
sup guys. first time to the track with the car... and I gotta say.. im very happy with it.. The guys at Evolution Performance did one outstanding job.. I bought their stage two Kit (CnL intake, 2.6 Pulley, SCT tune) along with a set of drag radials... and here are the results.
All Passes were made on the 93pump gas tune. no passes on the race tune as i was being a pussy lol
60' 1.87
330 4.9
1/8 7.4
MPH 98.4
1000' 9.6
1/4 11.454
MPH 125.01
Thanks again to Nelson, Sean, John and Fred. you guys were a great help with everything!! Look forward to hitting up the track again with you guys to try out the Race Tune
All Passes were made on the 93pump gas tune. no passes on the race tune as i was being a pussy lol
60' 1.87
330 4.9
1/8 7.4
MPH 98.4
1000' 9.6
1/4 11.454
MPH 125.01
Thanks again to Nelson, Sean, John and Fred. you guys were a great help with everything!! Look forward to hitting up the track again with you guys to try out the Race Tune
What converter are you running and how did the rest of your slip break down? I'm mostly interested in the 1/8th mph.
got it from dynamics, when i first got we felt it wasnt tight enough. so we send it back out to get tighten up some more. converter feels real good going down the track.
I have a dynamic converter as well. It's not tight enough anymore. It was perfect when I was only making 430 rwhp, but not anymore. I'm pinging the rev limiter across the line. What was the charge to have it tightened up?
they actually didnt charge, just because it was new and we had told them to make as tight as pssible. JL did most of the talking with them so it worked out fine just paid for shipping. just give them a call i dont think they charge to much.
I am working on it:
60' 1.527
1/4: 10.926
MPH: 126.23
Same mods and race weight as before. This pass was made on C16 but the car did go 127.8 on pump gas previous to this run.
60' 1.527
1/4: 10.926
MPH: 126.23
Same mods and race weight as before. This pass was made on C16 but the car did go 127.8 on pump gas previous to this run.
Great job Jason! Getting better and better.......
Clicked off another 10......Sweeeeet :beer:
Yeah it went a total of 4 passes in the 10.9x range.
Users who are viewing this thread
