Recent content by baby_gonzo

  1. baby_gonzo

    How is HPTuners for the 03-04 Cobra?

    I have HPTuners on my 01 Cobra...wish I would had used quarterhorse. I just needed the ability to tune the "Other" engines...FWIW I have to datalog with my SCT tuner / software. When you try to datalog it does some funky stuff with the gauges, but not sure if the 03/04 cars have the same...
  2. baby_gonzo

    2004 cobra with sct swap to hp tuners?

    I looked into this on my 01 Cobra tuned with an xcal2, and I was finding conflicting information. Some said they could, some said they couldn't. I bit the bullet and went ahead and bought the HP Pro. I first put my stock tune in so I had a stock file, extracted that, loaded my tune back in...
  3. baby_gonzo

    Replace clutch or something else?

    This is what was wrong with my car. I would start car, go through gears in garage just fine, put in reverse with no resistance, back out, and I could not get out of reverse. Would have to shut off car, release clutch, put in first, then start again. Would row through gears just fine. I...
  4. baby_gonzo

    Forged internals.

    If you decide to have your motor build, just remember, you get what you pay for. I currently have an 01 cobra, bought it non running but had receipts for a built motor, and decided to pull it apart since I got it cheap enough and had budget to see what was inside. Glad I did because it wasn't...
  5. baby_gonzo

    Need advice on pistons

    2618 require more piston to cylinder wall clearance due to their expansion. When I got my car it was non-running, so I took it apart to find out there were piston guts all up and down the cylinders due to not enough clearance. I want to say they require .006 clearance, but can't remember, and...
  6. baby_gonzo

    WTB 99-01 Driveshaft

    I know this is a long shot, but was wondering if anyone has a driveshaft for 99-01 cobra near Wichita, Ks. I'm afraid that shipping would be a nightmare on one of this things. Just for some clarity, I didn't know this when I bought the car, but I have a ford racing 45.5" shaft in my car. Was...
  7. baby_gonzo

    PLEASE HELP!! Need expertise advice on purchase

    Be careful...that price seems low. Make sure the title matches the VIN and the owners name matches the title also.
  8. baby_gonzo

    NAV DOHC Intake Flange

    I'm putting a 5.4 DOHC out of a NAV into my 66 F-100, and looking to make a sheet metal intake. Does anyone know where I can get a set of flanges to mate to the heads out of 304ss? A quick google search didn't come up with anything. I know MMR sells the adapters to run a coyote intake, but I...
  9. baby_gonzo

    2012 Ford F150 Supercrew

    I'm debating on selling my truck and using my 03 Cobra as a daily driver. I guess it depends on what sells first. See my craigslist add attached. Thanks for looking. Andrew 2012 Ford F150 SuperCrew 5.0 XLT
  10. baby_gonzo

    FS - 03 DSG Cobra, $20,500

    I've gotten a lot of feedback that I should try to sell here and also on craigslist. To simplify, here is a link to my craigslist add. 2003 Mustang Cobra I have more pictures if needed. Thanks Andrew
  11. baby_gonzo

    Selling my car

    Whers the best place to post to sell my 03 dsg? I tried ebay, but not much luck. Tried posting on here, but i dont have very many posts, so it didnt post. Any suggestions? I was wanting to avoid craigslist, but if people had good luck, i might try.
  12. baby_gonzo

    FS - 03 DSG Cobra, $20,500

    I was thinking of selling my 2003 DSG Cobra, and was told that this would a good place to start. 2003 DSG Cobra, 54k miles, stock pulley and tune. For the most part this is a beautiful example of a 2003 Mustang Cobra. I've not seen too many Cobra's like this that are as stock as this...

Top