I looking to trade a set of 42lb injectors (Bosch PN 0280150558) for a set of the red 30lb injectors ( Ford Racing M-9593-BB302). Also willing to trade for any other Ford 30lb injectors.
Hey guys, I have a 99 GT with a V2 E-trim that is idling erratically. The A/F is very rich until I begin to raise RPM's, then it leans out and bogs down. After the quick bog down it clears up and A/F is fine, but only seems to clear up over 2000 rpm. I can't even get steady datalogs because...
Just got my tuning software in yesterday, and I'm wondering exactly how it works. Do I just datalog, then plug the information off the excel spread into the grids on the software, or is there a formula I need to follow?
I just installed my Vortech S/C today. After the base tune it is surging at idle. Can I adjust the MAF to solve this problem, or do you think it could be something else? It is a 99 GT with a lightning MAF.
I'm stationed in the UK, and I want to install a supercharger that I have purchased, but I'm running into a tuning issue. No one here seems to have the software to be able to tune it without a standalone ECU. The price of that is around $3000, so I figured it would be cheaper if I buy my own...
I just finished installing an Auto Meter wideband, and the optional brown wire is suppose to go to a WOT wire. I wired it up to the center wire on my TPS thinking it was the correct one, but my car idled high so I disco'd it. I'm just wondering which wire I'm suppose to connect it to. It is a...
So I've installed almost every bolt on for my car, so now it's only right to finish it off with a supercharger. Here are some pics of my previously installed parts. I just installed my Walbro GSS342 today, and the other parts I'll be installing within the month. I hope to hit around 420whp...
I'm putting a Vortech S/C on and the instructions say to put the IAT sensor in the air intake assembly, but I read somewhere that putting a screw in style in the discharge tube is much better. Does anyone have an opinion on this, and if so, should I switch to the screw in style IAT sensor...
Is there anyway to set up tune on my SCT SF3 that will be good enough to get me to a dyno shop? If so does anyone have the fuel and timing curves I would need to input? The only reason I ask is that I'm stationed in England and the closest tuner is 1.5 hrs away. They want to install a piggyback...
Is there anyway to set up tune on my SCT SF3 that will be good enough to get me to a dyno shop? If so does anyone have the fuel and timing curves I would need to input? The only reason I ask is that I'm stationed in England and the closest tuner is 1.5 hrs away. They want to install a...