Recent content by bakers4v4_6

  1. bakers4v4_6

    Engine coolant

    Yea after calling advanced to have them verify they gave me the correct coolant. He says the description clearly states green and actually says do not mix with orange. I questioned when picking it up but the said “nope this is the one” I obviously had to make a point that this could had been...
  2. bakers4v4_6

    Engine coolant

    So I was gonna top off my coolant it was a touch on the low side. Possibly do a flush when I get the time. But I picked up the orange motor craft coolant. But when I opened the cap it looks green inside. Any suggestion before I do anything ? Hope that makes sense
  3. bakers4v4_6

    Nitrous plugs

    Okay so this is prolly why he said i might wanna go a step colder than TR6 we are going from 100 shot on pump gas to 150 on 103 octane... I will get 2 step colder plugs and keep the others on hand if needed during tuning.. If the car is mainly gonna be street driven with the occasional trip to...
  4. bakers4v4_6

    Nitrous plugs

    The tuner said possibly go colder so I was looking for a lil direction.. and to verify they were gapped properly before I like to hear the advice from others because just because I did something 8 years ago doesnt mean its the best today.. ya know ?
  5. bakers4v4_6

    Nitrous plugs

    So in the past I have always run NGK TR6 plugs i cant remembering the gap its been a long time so hopefully someone can help wanted to change them out before i get the car retuned.. Looking to bump it up to 150 shot running 103 octane fuel... if anyone has other plug suggestions also willling to...
  6. bakers4v4_6

    1.5 eco with coolant issue

    2018 escape both the escape and the f150 were suppose to hav these problems resolved.. its ridicilous honestly
  7. bakers4v4_6

    1.5 eco with coolant issue

    She has a 2018 Acadia and I have a 2019 f150 5liter. I got a bunch of run around about it being within tolerance on my truck and they wanna do a consumption test , change the dip stick and adjust the vacuum
  8. bakers4v4_6

    1.5 eco with coolant issue

    Went to change the wife’s oil In her escape and noticed coolant was low. Came in and I say something and she says oyea I have a recall I need to have it looked at. So I find the letter says it’s a quick tune fix. I call the dealer and explain we have a issue only To find out the issue is...
  9. bakers4v4_6

    front runners

    Yea so I just ordered some of these up thru jegs $300 shipped. I don’t track much and couldn’t see spending much more on a budget track set up
  10. bakers4v4_6

    front runners

    yea maybe but I Posted in the new edge forum and its titled front runner.. most people will know that im looking for a bias ply front runner (skinny if you will) sure I could of prolly been more specific on size which is a 17" because yes those are much more popular than one would believe...
  11. bakers4v4_6

    front runners

    Anyone have any suggestions or prefrence on bias ply front runners? was gonna order a set thru summit but then was curious if some are better then others... m/t is the most expensive i see see but was debating if spending the extra $100 is worth it or are these like anything else you get what...
  12. bakers4v4_6

    WTB 99 COBRA cup holder and coin holder

    Looking to buy the insert for the drink and possibly the insert for "coins" aka most likely a ash tray holder in a 99 cobra dark grey interior thanks
  13. bakers4v4_6

    WTB bias ply front runners

    Looking for a set of 17x4.5 bias ply front runners preferably 26' or 27" New or used as long as they are still in good shape thanks Not gonna spend more than what i could buy new
  14. bakers4v4_6

    03 Cobra Drag setup $500

    NP.. If you change your mind Pm me thanks

Top