Recent content by Black10thSVT

Im looking for a set of the Weld Alumastar Front runners. The Black ones 17x4.5. The part number on these 788B-1704204. Id like to buy a good used set. If you have a set let me know.

I need to update my picture. But I cant remember how to do it. Can anyone post the instruction link for that. I cant find it. Its been a while since I have been on.

I hate to dig up something old. I finally lowered my car. I used the H&R Race springs. When I hit a small bump I can hear violent noise, even worse on larger bumps. I have upper and lower ISO's in. I have checked the rear springs and they seam to be in the propper location and the shock seams...

So I have been reading and researching. But I just have not been able to decide. Non return vs return. Triple hat or dual. I have been leaning on the triple and running two pumps in a return style. But just can't get out of my head that dual GT pumps would do and be easier. I'm looking to...

I have been doing some searching and have yet to decide which one I want to use. So maybe you guys can help. Im going to start ordering mods for my up coming 2.9 whipple upgrade. I know I will be using 80's. Not sure on return or non return yet. So i figure Id go ahead with the throttle body...

I have the FTBR front and rear diff mounts. I have the thinker one on the bottom and 5 spacers per side. What is the optimum number of spacers?(how many did you use?) What is the optimum pinion angle? I cant find the degree anywhere. I might be over looking it. Im about to check my...

Yes I did a search. Here is whats going on. I polished a new Bassani cat back. When I pulled off my magnaflow, I saw my diff was leaking more than I had thought. I would only get a few drops when I parked it. Well after looking at the magnaflow the fluid that was leaking was running on top of...

I used the search, but must not have used the right combo of words. I resealed my Diff. Gonna let it sit for a while. Im wanting to use royal purple. The only problem is most everyone has 85-140 synthetic fluid on the shelf. The tag on the Diff calls for 75-140 synthetic. Would it be ok to...

I have used my tool before and have had very good luck with it. I used to install and remove hubs. With no problem. Today I went to pull a hub, and the little adapter for the puller will not fit between the hub and snout. This is on my car. Never had a problem like this before. The hub is...

Looking for an LPW cover. Does anyone have one they where going to use but didn't. That they want to sell? I know lpw has them, but is there a place that any knows of that may have them cheaper. Like a sale or clearence. Have the pumpkin out for reseal, and thinking of replacing my black...

I pulled my Magnaflow CB to replace it a Bassani CB. When I first installed the magnaflow cat back it was fine. I then put me bassani X pipe on and noticed the x pipe hung low. So the question is are /or have any of you guys seen this? And what is the Fix? I want to lower the car, But...

I have decided to sell my Stage III. I bought this from a friend/co worker of mine. He went the whipple route. I couldnt pass it up, an impulse buy. I made plans to install it but, cant see putting it on for just year. (Have almost all the money for a whipple) Its in good condition. He put down...

Pics added See Post 8 New Fiore 96-04 Mustang Clutch Quadrant 30.00 Paid 46.00 with shipping. BilletFlow 03-04 Cobra Non-Slip Grooved Pulleys (Hub and 1 Pulley Ring) Black 2.76 Size 80.00 runs 149.00 new.---SOLD--- New BilletFlow 03-04 Cobra Individual Non-Slip Pulley Ring...

Ok guys I have did a search and I guess Im not using the right combo of word's. I have a line on a local guy who has one. Hes putting the car back to stock. Or up grading didnt really ask. When my car was tuned last, the tunner told me the the duty on the pumps were already high, and the...

Long story, but ill try to make it short. I took off to Houston for a 3 day get away. Before I took off I decided to hide the keys to my cobra.(both sets) I tossed them in a bin where I thought no one would look. Well when My mother inlaw came in to feed the dog, she decided to clean up some...