Recent content by Blk4V00GT

Sold.

So I'm looking into buying my buddies 03. It's a full bolt on, steggy stage 4 port and nitrous car. Has a teksid block with stock crank and rods and aftermarket manley pistons. He noticed the blower making a funny noise and the car was down about 40hp on the dyno so he did a leak down test...

As title says looking to buy reichard racing 2.65 upper pulley for stock blower

Hey guys, looking for some lightly used 60lb injectors for my 03 cobra. Looking for Ev6 i believe? The ones that plug in directly and do not require adapters Let me know what you got, thanks

Hey guys, have any of you run a wot shifting box and what gains did it show? Turbo cars with manual trans at the track usually don't go well but how fast have you gone

Hey guys, have any of you run a wot shifting box and what gains did it show? Turbo cars with manual trans at the track usually don't go well but how fast have you gone

Hey guys, I'm a basically stock upper only bolt on Cobra and looking to hit it with a dry kit soon. How much of a dry shot can I safely run on 93 pump gas or 93 mixed with torco? I was planning about 75 on pump but how much do you guys spray and how much could I get away with on torco? I...

Hey guys, I have a buddy that is selling a Harris Speed Works stand alone fuel system that I'm thinking about buying. I'm still planning out my nitrous set up but looking to also purchase his NX wet kit. Can anyone give some details on any stand alone nitrous setups they've done and is it...

I feel like car still has a decent amount more in it with working out the bugs and practice. First time ever raced on anything other then hard street radials and got faster every pass but ran out of time. Cool down was about 45 mins between each pass, no ice or fans or anything. Mods in...

Hey guys, I need the module that connects to the main wiiring harness and mounts inside the passanger side fender. Mine apparently went bad and the ecu cannot read it so my car won't start. Need it asap. Please let me know if you have one

Hey guys, I picked up a used set of 28in/10.5/15 MT stiff sidewall slicks at bowling green last weekend and plan to throw them on the car soon. My questions are.... With my mods listed in my sig how much tire pressure should I have in the tires and what rpm should I be trying to launch at...

Alright guys so I had a 00gt sra built about 6 months ago with a new 31 spline 03 cobra differential, moser c clip axles, and 3.73s. Car has always had a bad vibration/shake since installing the rear but I assumed it was the solid control arm bushings and ignored the issue. Finally looked...

Okay guys so a few months ago I had a sra built with new 31 spline moser axles, welded axle tubes, etc. I also did solid lower arms and and adj upper arms with solid bushings. So I figured all the vibration was from the solid bushings, on the dyno Monday while getting tuned the back wheels were...

Hey guys, I've been trying to search and just can't seem to find much info out there on the 2.6, everything is either 2.2 or 2.8, So what are the normal hp numbers for a 2.6 on 93 pump gas, then say 23lbs on torco or 110? Mods would be the following. Accufab TB JLT carbon fiber RAI BBK...

Hey guys, looking for some new aftermarket rotors, not stock ones Slotted or drilled, not looking for anything super expensive but figured I would check and see if anyone has some they didn't use before I buy some elsewhere. Thanks