Recent content by cobrapete03'

Well contrary to a lot of what we've heard here on the forum, Horsepower TV is claiming that the Blue paint on the D/S head denotes the new design...So is this true or what?...Since they mentioned the tick, you'd think they got their info straight from Ford before broadcasting that...

Question from May MMFF Issue Page 71 In the article, Norma's Driver, page 71, when they say "...Motorcraft plugs are used to keep the '03 firing on all eight" they are referring to the Motorcraft Copper Core plugs rather than the stock platinum plugs, correct? Thanks Sorry, I screwed up...

Picked up some of the new Meguires New NXT Tech Wax and applied a coat...This is some of the best polymer wax I've ever used...Goes on smooth, no white haze, comes off very easily with NO wax particle dust...Does a EXCELLENT job of filling in those/any swirl marks...Just a gloosy finish with no...

Question: I took my baffles out of Bassani Cat-Back and did notice that one of the baffles is approximately 1" longer than the other. What side does the longer baffle go on?( I didnt notice till after the fact) I assume the system was specifically designed like this to minimize the natural...

Are Denso Irridium IT22's too cold for 14 lbs? If not, what gap is appropriate? Thanks -pete:coolman:

Sorry guys, I know this post doesn't belong here but I wasn't getting a response @ Road Side Pub. I was hoping someone with a CarFax account could help me out with this VIN# VIN# 4F2YU08151KM13381 I'd be willing to compensate $5 for your time via Paypal. Thank you. -pete...

Does anyone have a CarFax account that could help me out with a VIN#. It would be greatly appreciated. VIN# 4F2YU08151KM13381 Thank you. -pete e-mail: [email protected]

Does Anyone Have a CarFax Account Does anyone have a CarFax account that could help me out with a VIN#. It would be greatly appreciated. VIN# 4F2YU08151KM13381 Thank you. -pete:coolman:

I was changing my oil today and I noticed a trail of oil running down my Motorcraft oil filter(only in car for 1k miles)...traced it to the seam on the filter, where the cap meets the base...there is a lip...it was leaking from about 3/4" along this seam...apparently it had enough pressure to...

I know there are a couple 49er fans out there...How 'bout that game at Philadelphia...Just when our team has nothing to play for except pride, they showed up big time!...Now the NFC playoff road goes through St. Louis...I can't believe Tony Parrish didn't get nominated to the Pro-Bowl...He leads...

Thanks again Mike, The exhaust sounds sweet!...No more drone, just a crisp growl...Did the job my myself in a little over an hour...Really a pretty easy system to install compared to the third generation mustangs...The 4" tips really complement the cutouts...Here are a couple pics...

Hi guys, As some of you already know I installed the GordsFord HX earlier this week. The quality is superb, and craftmanship is excellent. Ntechnic's thread is way more comprehensive than mine so if you have any questions. Here are my suggestions: ~replace the old rivets top (4) +...

I just read this thread here: http://www.svtperformance.com/forums/showthread.php?s=&threadid=66493 This thread raised a couple questions for me such as; 1.) Do our cars tend to ingest the same amount of oil as was indicated in the thread? 2.) Is it worth going for the breather cap...

Well I bought a Steeda CAI about a month ago and today I received a Steeda Logo'd Thank You card containing the agent's business card and a hand written note thanking me for my business. This is the kind of customer service that gets repeat customers:thumbsup: Even though I wouldnt buy every...

Hello All, Does anyone here have the above-mentioned video originally recorded/produced by 98 Snake Eater?...I tried the link but unfortunately the bandwidth is not adequate to show the video...If you do have the video can would you mind posting it...Thanks and have a great weekend. -pete