Recent content by da28fan

This is a billet aluminum battery cage or battery box for Optima batteries. It has the word “Mustang” cut out in the top, along with the infamous Mustang horse. The base mounts to either your stock battery tray, chassis, or trunk floor. I have an 03 Cobra, and modded my stock battery tray so...

Two Walbro GSS342 255lph fuel pumps. They have 1000 miles or so on them. Priced to sell very quickly. The two male ends of the wiring harness will be in the box, but doubt you'll need them. First $70 bucks for both gets them, shipped to your door, in continental USA. :poke:

Installed a 4 pound lower on my 03 Cobra. This is the stock lower pulley that came off. Clean, in good shape. $125 plus $12 shipping.

Looks like the squeal has started, so gonna drop the tranny for a fix. Getting Ford Racing TOB, retainer from Lethal, pilot bearing, and a new clutch fork. But what's the best clutch fork? Lakewood seems to make a nice one, but it's an inch shorter and don't need an even harder clutch (will...

A pair of two Walbro GSS342 255lph fuel pumps. They have 1000 miles or so on them. Installed in my 03 Cobra as part of a Lethal Performance return style fuel system. Just installed a different blower and need even more fuel! So these are priced to sell quickly. Included are just the two...

Just bought a used Metco 4 pound lower pulley setup for my 2003 SVT Cobra. Took it apart and am powder coating it. But I was hoping someone would have a PDF (or a link or file) of the Metco installation instructions, or just a pictoral diagram of the spacers and bolts, etc. Email address is...

This is a used Kenne Bell 3.75" 8-Rib pulley. It uses an 8mm bolt, not a 10mm bolt, so I believe it is for the older KB blowers. Has a slight cosmetic imperfection on the front edge, as in picture, but worked fine for me. Also included is a brand new 8mm bolt I bought direct from Kenne Bell...

Hi there. Just installed an Innovate Motorsports LC1 Wideband into my 2003 Cobra (mods in signature). I've heard that the ratio should be lower on a car running E85 than regular fuel, possibly as low as 9.5. So a couple of questions. First, will the Innovate LC1 wideband setup work...

This is a freshly ported and matched blower, throttle body, and plenum from a 2003 SVT Cobra. It has never been used since it was ported. It also comes with a Motoblue Quick-Change pulley hub and a 2.73" pulley ring attached. No puller is needed to change pulley size again. Just use a...

This is a used Kenne Bell 3.75" steel 8-rib pulley. Came with my 2.2 that I bought, but ended up using a different size. Has a slight imperfection, as seen in the picture, probably from being dropped at some point, but pulley works fine and is polished and shiny! Also including a brand new...

This is a brand new, never-used, or never even mounted 3" Kenne Bell 8-rib pulley. I bought it for my 2.2 Polished blower, but ended up sticking with my 2.75. Cost $79 directly from Kenne Bell. Will deliver to any continental US address for $70, and also tossing in a new Hex Head bolt that KB...

Looking for a polished, aluminum radiator cover for my 2003 Cobra SVT. I've seen pics of the Steeda one and the UPR, but just want a nice polished radiator cover that is reasonably priced. If you one that is either new or in great shape, please LMK.

:banana: This is my stock Eaton supercharger / blower, plenum, and throttle body from my 2003 Cobra Vert. I just upgraded to a Kenne Bell. Nothing wrong with anything you see; what’s in the pictures is what you will receive. Blower also comes with a Moto Blue Quick-Change pulley setup...

LFP Pulley Puller for the 2003/04 SVT Cobra series. Used once to remove the stock pulley from my Eaton and it's been sitting since. I've seen more pullers listed, but make sure you get the whole kit, as many of them are missing the metal bar that goes into the side for leverage when loosening...

Here is a used set of fuel rails and connector from my 03 cobra. Upgraded to a return-style fuel system, so parting with the pieces I'm no longer using. $90 shipped in continental US.