evolve's latest activity

I'd replace it with this: https://performanceparts.ford.com/part/M-6009-B53

Well first let’s get you a voltmeter. You can get a $40 one at Oreilleys that will do damn near everything my $500 snap on one will...

OK. So the full info on Kevin Kurdziolek's Cobra. Jason Roth built. L&M 9.5:1 CR Motor, Gen 5 3.0 Whipple Crusher, 4" upper pulley, 2#...

Used for tuning only. Too much (for my tuner) injector for my setup. Went IDs. Selling for a loss here. Asking $1200 shipped plus buyer...

Thanks. My Fore pricing ain't bad either. Available 7 days a week for support and even the rare occasion I take a vacation.

Snover hasn’t been on since 9/4. Probably building a nuke.

He's probably in Korea working on the reactor.

It has been years since I've owned my 03 and removed the lower pulley. If I remember right the lower pulley bolt is reverse threaded...

Took my car to Finish Line for tuning. Will update the thread once things are all done. Mods added: Gen 5 3.0 Whipple, 1500cc DW...

If the engine is in the car, you don't have to torch anything. Just jack up the front and use a breaker bar and 14mm hex. Lower the car...

I think I’m just going to send it. Lol. Sent from my iPhone using Tapatalk

Injectors sold. Sent from Beautiful Colorado

Thanks for the recommendation Sent from my SM-S906U using Tapatalk

My brother and one of my best friends own Finish Line. They have tuned and built many Terminators. Greg is one of the best tuners...

Last post about Colorado or Denver was about 7 years ago. Who is everyone going to for tuning now? I've talked to Rob Williams and...