Can you add more than one handheld to the software? I have 3 unlocked handhelds, if I could buy the software, write 3 separate tunes, and upload them to 3 different cars, I would be interested.
I've got a Steggy ported Eaton w/ polished case, 2.76" pulley. Have a polished elbow and Accufab SBTB to match it. Let me know if you're interested in all or some of it.
Im currently into my first 4.6L engine build, I finished tearing down the engine tonight. I must add that I am not new to building engines by any means, I am however new to mod motors, and to be honest new to Ford. My past engine building experience was mainly focused around pushrod SBC & BBC's...
I'm getting ready to drop a NA Aluminator long block in my 03 Mach 1. After seeing the crappy specs for the stock cams I decided to try to find a deal on something to give me a little better performance to put in before I put the motor in the car. I'm planning on adding long tube's, pulley's and...
I'm about to put an aluminator in my 03 Mach 1 w/ 55k miles on it. Is it possible to remove the motor from the top or does it have to be removed from underneath? I'm kinda new to mustangs but not cars in general.
I have an 03 Cobra that has a Bassani 2.5" x-pipe that terminates into 2 2" x-pipe back pieces that have Flowmaster 40 series welded in. The exhaust sounds like garbage (more like a garbage can full of aluminum cans actually) and I would like to replace the 2" x-pipe back pieces w/ 2.5" pipe and...
I've been trying to sort out some issues with an 03 Cobra I bought. I've been trying to track down a problem with the fog lights. The drivers side works fine, I verified 12v at the plug w/ a voltmeter on the pass side but the ground is no good. The wiring from the plug is fine going into the...