Recent content by iggster

  1. I

    mach 1 in the 1/8 goes 5.23 at irwindale

    4.6 4 valve 25lbs (been 44lbs before) modded on 3 turbo kit with 88mm gtx stock heads just springs (spinning to 8800 rpm+) stock manifolds follow me on instagram or facebook instagram smptuning facebook sergio tuning
  2. I

    mach 1 in the 1/8 goes 5.23

    4.6 4 valve 25lbs (been 44lbs before) modded on 3 turbo kit with 88mm gtx stock heads just springs (spinning to 8800 rpm+) stock manifolds follow me on instagram or facebook instagram smptuning facebook sergio tuning
  3. I

    1500hp+ mach 1 update

    First startup with new upgrades Todds custom cams Sullivan intake Mhs heads Billet oil pump Billet guides Upgraded chains Modded steel tensioners Rest of details of car 4.6 12.5:1. Compresion Gtx 5533r Gen 2 turbo Mikes ringless Vasco glide 8.8 33 spline Meizire shocks Team z suspension...
  4. I

    quickest stock heads/cam/intake/manifold 4 valve?

    save for future picture
  5. I

    quickest stock heads/cam/intake/manifold 4 valve?

    went 5.85@129mph turned up the boost and half way down the track got a missfire still coasted to a 5.45@128.. logs show it going 141mph before the eight!
  6. I

    turbo nitrous hollefy dominator 2003 MACH 1 build

    got it out for the first time with the new setup
  7. I

    turbo nitrous hollefy dominator 2003 MACH 1 build

    first transbrake test with the new motor and 91mm gen 2, 6lbs of boost in 4 seconds, i think i can get it to 8lbs in about 3 seconds with some tuning
  8. I

    turbo nitrous hollefy dominator 2003 MACH 1 build

    big updates! upgraded to a 91mm gtx gen 2 5533r turbo raised compression teksid build with custom diamond pistons
  9. I

    took the turbo mach 1 to borna 1/8 mile

    I just got an old termi motor and put new rings and bearings in it torque honed the block and align hones it and head studs, my old heads that had valve springs on them.
  10. I

    took the turbo mach 1 to borna 1/8 mile

    went to borona last weekend, tested the parachute in this pass so we let off half track, it went 5.88 at 119mph on 25lbs and 100 shot, we got it up to 33lbs and 200 shot. ( grudge car no numbers on that) stock termi motor with head studs and valve springs now!
  11. I

    turbo nitrous hollefy dominator 2003 MACH 1 build

    went to borona last weekend, tested the parachute in this pass so we let off half track, it went 5.88 at 119mph on 25lbs and 100 shot, we got it up to 33lbs and 200 shot. ( grudge car no numbers on that) stock termi motor with head studs and valve springs now!
  12. I

    turbo nitrous hollefy dominator 2003 MACH 1 build

    I made my own traction control through the holley using a driveshaft sensor and a front wheel speed sensor, it pulls x amount of nitrous first depending on slip and then timing and finally boost if things get out of control to much
  13. I

    turbo nitrous hollefy dominator 2003 MACH 1 build

    besides the upgraded suspension and traction control I have also added a 300 shot progressive kit and its about 70lbs lighter. https://www.facebook.com/photo.php?fbid=1631760696889858&set=pb.100001678310419.-2207520000.1508549591.&type=3&size=960%2C720...

Top