Recent content by jeffs

  1. J

    On3 single install info

    I'm not exactly sure, I think on3's car with this turbo, and kit made 830 at 15psi, I'm running about the same boost, and also on E85
  2. J

    On3 single install info

    It turned out really good, the power's amazing. I had a few issues because of rushing into and through 2-step, and trans-brake bs, but this was 100% on me.
  3. J

    What happened to the On3 SINGLE turbo kit for Coyote's?

    It's the hot-side merge pipe from both banks leading into the turbo.
  4. J

    What happened to the On3 SINGLE turbo kit for Coyote's?

    You would more than likely still be waiting for the CPR deal, lol. Whipples are super nice, and any pd blower's going to be pretty simple and effective. The grass isn't always greener, lol. If I had a choice between a nice Whipple and a CPR kit I'd probably choose the CPR kit, and that is (if) I...
  5. J

    What happened to the On3 SINGLE turbo kit for Coyote's?

    Sorry, I just don't get on here that much any more. I basically had all winter long and was in no hurry whatsoever, but it was a long process for sure. I actually had time to remove my motor, and have the bottom end built with forged stuff, and can say that putting on the manifolds, merge-pipe...
  6. J

    What happened to the On3 SINGLE turbo kit for Coyote's?

    I ordered it in the fall of 2018, and received the kit less than a weak later. I had a few exhaust tweaks I had to make. I had to cut, and re-weld in 2 places to get the piping aimed correctly and put a clearance dent in the pipe after the down-pipe to miss a suspension component. If you want...
  7. J

    What happened to the On3 SINGLE turbo kit for Coyote's?

    Not here at work, It has went [email protected] in the eighth in 9000' DA. Previously with a 5C converter and Paxton the best I ever did was a [email protected] at the same track. I'm pretty certain it can go a mid 6, as I've had some serious issues getting the car to shift before hitting the rev limiter on the...
  8. J

    What happened to the On3 SINGLE turbo kit for Coyote's?

    Mine is running great!
  9. J

    Adding VMP/Roush blower this summer...advice?

    I believe VMP's stage 1 kits are emissions compliant. I think the difference is in the CAI provided.
  10. J

    Has anyone put Edelbrock 2650 in an 11-14?

    Why not VMP?
  11. J

    Any Blower Install Guru's (Indiana Area)

    I think you'd surprise yourself on how easy it will be, especially a pd blower of whichever brand you choose. Just allow yourself some time. If you were to add oil pump gears, I'd suggest the help of a pretty handy friend.
  12. J

    Adding VMP/Roush blower this summer...advice?

    I'd go with the VMP's new 2650 at whichever level kit you want (talk to them and tell them what you're after). It'll be spun slower at the same boost level of a smaller 2300 blower and should equate to lower iat's, which is better for everything. I'd prefer VMP over Roush just from a tuning...
  13. J

    On3 Single Turbo Kit

    I like the sound of that!!
  14. J

    On3 Single Turbo Kit

    A friend of mine made over 800whp @15-16psi on C16 in his 76/75bmf powered fox through a 6R80. I'd guess that could've been higher 800's on E85. So I can believe 4 digit rwhp from this kit. How long has this On3 single been out for Coyote S197's?
  15. J

    On3 Single Turbo Kit

    Damn strong for single digit boost. makes me wish I would've held off on the fancy electronic boost controller for the moment and tried the 11psi spring first, hahaha!

Top