I am boggled. I am pulling an input shaft off a t45. I have removed the bellhousing and the input shaft, bearing and a few other gears are just dangling around loosely but I can not pull off the input shaft. Once the bellhousing is removed am i missing a step to be able to pull the input shaft off?
I have the following for trade
3.5" Draglites with radial tires.
10" Draglites with 26X10X15" M/T ET Drags.
The entire setup is like new with only 3 passes. I ran this setup on my 96 Cobra.
I am looking for 18" BBS RK's. Let me know if you are interested.
I would also consider 18"...
Best deal on 18" FR500's $529 shipped??
Found these on eBay, anyone deal with these guys. Most replica wheels are made in one Chinese plant so I would expect the quality to be ar par of the other 3 billion replica wheels out there...
Post pics of NON-Ford/saleen wheels.
Lets see some pics of SN95,s with aftermarket wheels. No FR500's, Bullitts, Cobra R's Saleens or other Ford/Saleen replicas. Looking for unique looks, not the same old same old.
I thought I would take the time to write a little documentary on my experiences drag racing a SN95 Cobra. I read several posts here daily about drag racing, time slips etc etc etc and I can relate to the frustrations members are having and I can also relate to the goals you guys are after. I...
Got the Cobra back to the track today with decent results. I will only list power/performance mods first.
96 Cobra (Stock Longblock with no intake work)
Paxton Novi 1000 with 7-8 PSI
BBK Longtubes, BBK Catted H-Pipe, MAC Exhaust
Snow Meth Injection
Ford B Springs
Lakewood 70/30's and...
Can somebody take a pic of how the passanger side PCV hose setup goes on a Novi setup? The hole in the valve cover is slightly under the main intake tube and I dont see how it will hook up. The stoch setup had a sharp bent hose and plugged right into the intake tube. How does an Novi setup go?
On a 4.6 the clutch cable is secured in three places,
1. A bracket right next to the master culinder
2. The Drivers side frame rail
3. The K member
I need info or pictures on number 2. The frame rail has three brake lines that are routed right where the cable bracket looks like it may go...
Anyone experience this? It seems the blower is in the right position and orientated correctly but the coil is hitting the blower even with the aftermarket bracket. The coil is almost touching the valve cover so I cant even go theat way if I wanted to. Anyone have pics of theirs?
Some companies are such jokes. I ordered some products from Blue Oval Industries (Their Cheap China Made headlights and a few other things. About an hour after I placed the order I emailed them and asked to remove a few products from the order…..No response. A few days later they ship the order...
I love the colors you can get with Powdercoating! Here is a set of Valve covers I did for a Cobra, Silver Vein Topped with Candy Blue Translucent. Try doing this with paint!
LOOK CLOSER................
Looking to trade my 3.25” pulley from my Novi 1000 (Said to run about 12 psi with this pulley) for a 3.50” pulley (8-9psi). Anyone want to raise their boost? 8-9 psi will be fine to start for me. My kit is a 96 Cobra.
Selling a like new Nitrous Express wet kit 20922-10. This sytem only has 4 bottles run throught it. Comes with a custom bottle mount that can be glued to the floor (I ran it like this and it was SOLID), saves from drilling floor and can removed with a guitar string when need be. This is just the...
This warmer is as new as you can get. I installed it but only ran the nitrous in the summer and I had problems with HIGH pressure! Along came fall and I used it for one time at the strip on 4 passes. Must say it worked real nice! Went with a blower now so I am parting out my Nitrous system...