This old ass thread may have just saved me a few hundred bucks and who knows how much time.
I have an FC2 controller and was sure that was my problem.
Car is currently parked in a random neighborhood 30min from home. I was planning to rewire the whole fuel system on the side of the road...
Here's a run down of what I got going on. I have a sleeved short block from a builder that has alot of duds out there. During the long block build up in threw a set of boss exhaust cams in. From the first startup I threw a p0017 for bank 1 exhaust cam position. I was very sure I had the...
Fans won't come on, so I checked the plug. 2 of the pins are scorched. Of course this part isn't in stock at any auto parts store, is there another option? Resistor from a different year work?
I want to set it up with two boost groups. Boost group 1, I want to run at 8psi. Boost group 2, I want to run at 11.5psi. I have been dicking around in the menu for awhile and I have it set to externally switch to boost group 2. I'm going to mount a momentary switch somewhere and use that to...
My MSD unit killed itself, and I don't have time to wait for the warranty process to get another one. I had my two step and transbrake wired to the same momentary swtich which provides a ground. What would be the correct way to do the same with the wot box? I know I'll have to get into the...
Well, my personal best pass was a short lived celebration. I stabbed the throttle on the freeway to get around some slower traffic, and the car felt great as usual. But as I'm slowing up the exit ramp, I hear a a terrible tapping sound coming from the transmission area. At first I thought it...
Made some real progress today at the track! Chris Holmes worked with me all day to dial this baby in. Pass, datalog, revision until we ended up with this and I was politely asked to load my shit up and leave.
What have some of you done to shed some lbs? I have the car turned up as high as I'm comfortable going. The only way to go faster is to shed some pounds. I have a BMR K member, sway bar delete and radiator support.
My car sees much more street time than track, and after alot of trial and error, I'm still having a hard time getting it to dead hook on the launch. I'm running a 28x10.5 stiff sidewall hoosier with bias ply skinnies, BMR Relocation Brackets, BMR adjustable LCA's. Spraying 30ft with a...
I put in a DSS driveshaft recently. In order to bring the driveshaft length into spec, I had to shorten my BMR LCA's to as short as possible. I don't have any vibration issues, but the car feels real sketchy on the top end. I made a few test passes on the street this weekend and I had to get...
Just wondering if any of you guys with the On3 kit are having this issue. Car runs smooth and pulls hard. I've been doing alot of datalogging and after a 3rd gear WOT pull, I leave a nice size cloud of white smoke as soon as I get out of the throttle. It only lasts a few seconds, but you can...
I got to the point in my OPG/On3 install that I could fire up the car and cruise around. I'm throwing these codes. It looks like I may be a tooth or two off when I reinstalled my timing chains. I was 99% sure that I had it right. From these two codes, can I narrow down which side is not...
Anybody have a diagram of the fuel pump harness? I need to wire the sender back into the system but I'm not sure which two wires from the factory fuel pump connector are for the sender. Thanks