New GForce axle shafts for the Terminator - potential GB in the works

Have this up at ModFords as well: new GForce upgraded axle shafts for the Terminator (and earlier Cobra's when using a 31-spline diff). These are an unequal-diameter version like Ford has finally gone to on the '15-up Mustang (taking a hint from GM).

Thread at ModFords:

http://www.modularfords.com/threads/250482-New-GForce-axles-shafts-for-the-Terminator

Link to the new half-shafts at GForce:

https://gforce1320.com/product/99-0...axles-left-and-right-requires-31-spline-diff/

Some more reading on the subject:

http://www.terminator-cobra.com/suspension.htm#Half-Shafts

EDIT (11/28): With an initial order of 10 going in, Casey at GForce is willing to drop the price to $1400 (+ shipping) per set, down from the original cost of $1600 per pair. If enough guys do chime back in and express an interest, I'll start a list on this post and get the ball rolling.

Here they are:

As an FYI, GForce is also making the Ford Racing half-shafts for the S550 Mustang - forgot to mention that. Those are M-4130-MA and are every bit as nice:

I'm interested dependent on final pricing. Glad to see someone finally paid attention to axle harmonics, I read about this on tazcobra's website years ago.

Man those gForce axles just looks bad a$$!!! 8.8 FTW

JetmechF16 said:

I'm interested dependent on final pricing. Glad to see someone finally paid attention to axle harmonics, I read about this on tazcobra's website years ago.

Click to expand...

Taz and I have been on the same page about this for years. We were both glad to see Ford get on board, and it's even better that Ford Racing opened the door for GForce to expand the options for the SN-95 Cobra crowd.

Will just have to ask Casey at GForce what a buy of ten would get for a price break and go from there. Will touch base with him next week and post details as the become available.

I'd be interested depending in what pricing looks like. First thing I though of when I first saw the FRPP kit was I wish the Terminator would get those.

Are these going to be used with the stock outer hubs?

Right there on their description: "Direct bolt-in...".

I would also be intrested depending on the final price deal.

jrgoffin said:

Right there on their description: "Direct bolt-in...".

Click to expand...

No need to be a dick about it. I don't consider swapping hubs that difficult. In order to run these I'd have to swap my stock hubs back in. That's why I asked.

A buddy of mine I believe let them borrow his irs as a template. In exchange they gave him a set of axles. Ill message him and see if he has any input on the final product.

I am the one that let GFORCE borrow the irs out of my 04 so they could do the R&D for the cobra axles. GFORCE makes great products. garuntee guys who buy these axles will not be disappointed.

slo984now said:

No need to be a dick about it. I don't consider swapping hubs that difficult. In order to run these I'd have to swap my stock hubs back in. That's why I asked.

Click to expand...

He wasn't being a Dick IMO.

slo984now said:

No need to be a dick about it. I don't consider swapping hubs that difficult. In order to run these I'd have to swap my stock hubs back in. That's why I asked.

Click to expand...

I cut and paste the info right from their site to answer a question because you are too lazy to look and I'm being a dick?!?! It isn't too late to start...

02JoeGhost said:

I am the one that let GFORCE borrow the irs out of my 04 so they could do the R&D for the cobra axles. GFORCE makes great products. garuntee guys who buy these axles will not be disappointed.

Click to expand...

Very cool! It will be neat to hear more about the R&D process for sure.

03cobra#694 said:

He wasn't being a Dick IMO.

Click to expand...

Definitely.

jrgoffin said:

I cut and paste the info right from their site to answer a question because you are too lazy to look and I'm being a dick?!?! It isn't too late to start...

Click to expand...

Knock yourself out man. Was just trying to get some info. Because, you know, companies always get their descriptions right. Kinda like how in this one it says 99/01 would need to convert to 31 spline. Yet 01's already have 31 spline inners.

Im also down for a set but I cant find it on their site but didnt they have an Outlaw series of these that were 1500hp?

slo984now said:

Knock yourself out man. Was just trying to get some info. Because, you know, companies always get their descriptions right. Kinda like how in this one it says 99/01 would need to convert to 31 spline. Yet 01's already have 31 spline inners.

Click to expand...

That was my generic comment covering the earlier Cobra models. All the details are right on their site, which is what I am passing along.

Carbon Driven said:

Im also down for a set but I cant find it on their site but didnt they have an Outlaw series of these that were 1500hp?

Click to expand...

They must have just made a recent change and only show the one set now. On a better note, it looks like these carry a lifetime warranty, so that is a win.

No warranty if over 1G hp

Carbon Driven said:

No warranty if over 1G hp

Click to expand...

I don't see that as being an issue for most, especially since "HP" is a bit of an ambiguous way to state their limits.

Interested depending on price too