2007-2009 factory wheels, two widened to 11"

2-wheels are widened to 18x11 with 345/35/18 mickey thompsons
2-wheels are stock with 285 goodyears

All four wheels have the TPMS.

No curb damage. All clean up nice. Low mile wheels. I would replace the drag radials. $700/best offer. Paypal preferred. I can remove the tires if the wheels need shipped.

A 315 would fit on the wide ones.

Wgat, do you have to do to clear the 345s

drewzx3 said:

Wgat, do you have to do to clear the 345s

Click to expand...

They were on the car when I bought it, not sure exactly what it takes to make them fit.

Here's the suspension setup: Steeda Super Sport Lowering springs, QA1 adjustable Rears, with CHE adjustable Lower and Upper Control Arms. Subframe reinforce mounts for rear control arms, adjustable panhard bar. Upper Control Arm HD Mount.

Would you consider selling the rears only?

G-Force said:

Would you consider selling the rears only?

Click to expand...

Sure, $450 plus shipping

Thanks. Let me think about.


Sent from my iPhone using Tapatalk

These would be so great on my car, but not sure I could fit it in the front

I'll take all the tires off and sell just the rims. You could put stock size front tires on.

Would these fit just fine on a 2010 GT500? Very interested in the set and have paypal ready. Shoot me a pm.

Offers? I'd like to sell these. They've been stacked in my garage for months and I am tired of looking at them.

Do you know what the new backspacing and offset is on the widened wheels? I'm in York, Pa and I'm very interested. You can call or text me @ 717-968-9016. Thank You, Marty

SGT MERC said:

Do you know what the new backspacing and offset is on the widened wheels? I'm in York, Pa and I'm very interested. You can call or text me @ 717-968-9016. Thank You, Marty

Click to expand...

The offset should be stock, +45mm. I'm guessing the backspacing will be stock +1.5" but I can measure it. What are you putting them on?

ryan319 said:

The offset should be stock, +45mm. I'm guessing the backspacing will be stock +1.5" but I can measure it. What are you putting them on?

Click to expand...

After I thought about it, that's not right. the stock wheels are 9.5" wide, 7.125" bs, and +45offset. if I did the math right, the modified wheels are 11" wide, 8.625bs and around +65mm offset. It's hard to measure them with the tires on but that should be pretty close.

I got a set of stock wheels & don't need the fronts. Would you still sell the rears only? got any more pics of the welds?
Thanks

Here's a shot of the welds and I gave the wheels a quick cleaning.

How much for just the rears?

Bravo gt 500 said:

How much for just the rears?

Click to expand...

500 and you can have the fronts for free.

How much for just the fronts?