JLT RAI, LFP Hood Vents, Billetflow 2.76 ring, Tripple pillar + SEVERAL stock parts

FiveOhJoe

Member
Established Member
Joined
Oct 4, 2012
Messages
943
Location
Western Chicago Suburbs
Sold my Cobra a couple days ago so I'm selling some parts I have left over. I bought a lot of this stuff used on here with the intent of using them on my car to part my car out so I do NOT know the millage of anything.

All prices INCLUDE SHIPPING. Payment via PayPal, Quickpay, or cash in person.

SOLD - Torch Red JLT RAI with the optional sock over the filter. Paint rubbed off in one spot as shown in the picture.

SOLD - LFP hood vents. Perfect condition, includes the hardware to install them

$65 - Autometer tripple pod attached to an OEM pillar. Ready to just snap on in place of your factory pillar.

SOLD - 1" bolt-on wheel spacers. Unknown brand.

$40 - Billetflow 2.76" ring in blue. A pretty fair amount of scratches and dings but it still functions fine.

$20 - STOCK idlers. Bearings are good, no play or noise.

SOLD - STOCK alternator pulley

$225 - STOCK caged lower pulley.

$50 - STOCK mass air flow sensor and housing.

$120
- STOCK 39lb injectors.

$170 - STOCK fuel hat. Does not include level sender. Not sure what happened with the lines but it is missing the line that goes from the Y fitting to the metal fitting on the hat itself. Just needs a small section of hose from the parts store. Also includes the line that goes from the hat to the filter.
SOLD - STOCK fuel rail assembly with feed hose.

SOLD - STOCK camber caster plates plus some other stuff. Basically all the stuff you take off when you install aftermarket CC plates.

SOLD - Stock EGR stuff. The parts sitting on top of boxes were used for only 50 miles or so when I had to get my car to pass emissions.


34332571593_b4d2e35a38_b.jpg



34297571994_15fae6c704_b.jpg


34755859550_eecfde74bb_b.jpg


34755841970_675ed3acd4_b.jpg


34332583413_44a587c867_b.jpg


35012095101_8635856c99_b.jpg
 
Last edited:

BoostinFD

Member
Established Member
Joined
Aug 20, 2014
Messages
40
Location
St. Louis
Interested in the Hood vents. I don't know how to send a PM on this site... unless it's the "conversation" thing... then I sent you a conversation :)
 

FiveOhJoe

Member
Established Member
Joined
Oct 4, 2012
Messages
943
Location
Western Chicago Suburbs
Any chance you have pictures of the JLT installed? Also is the worn spot visible when installed?

Sent from my SM-G955U using the svtperformance.com mobile app
I never installed it but it looks like it was rubbing on the AC line that goes right under the intake. I would bet that you would not notice it when installed. The guy that sold it to me sold it before he even removed it from the car and he said it was perfect. He noticed the blemish after removing it which would suggest it is not noticable
 

Users who are viewing this thread



Top