FS: Kenne Bell 2.8LC tuner kit & Dual 75mm throttle body

JB_2010GT500

Active Member
Established Member
Joined
May 21, 2014
Messages
419
Location
CT
**UPDATE** All items are SOLD. Thanks guys!

I am selling my Kenne Bell 2.8 liquid cooled blower and dual 75mm throttle body as I have recently upgraded to a Kenne Bell 3.6 system, 168mm oval throttle body and low-vacuum bypass valve. The car made approx. 730 whp SAE on a 3" pulley and approx. 750 whp SAE on a 2-7/8" pulley. This blower was installed on 6/2014 and removed 4/2017 when I did the blower swap. There are 6,821 total miles and 98 1/4 mile passes on the supercharger. Parts are in good condition and rotors are in great condition.

Because I upgraded to a 3.6, I reused several components, namely the KB BAP, Gimme 5 intake, and lower intake mounting plate. Kenne Bell will be able to identify all missing components to complete this kit as they know exactly which components needed to be reused for my 3.6 upgrade. All missing parts can easily be purchased thru Kenne Bell.

I am asking SOLD shipped for the following:
- KB 2.8 LC supercharger
- Bypass valve
- 86.4" belt
- 3-1/4", 3", and 2-7/8" pullies
- LC coolant lines
- 1/2" lower motor mounts (to clear stock hood)

Thanks,
John

5ba783efd4bf89798c5d1dc659085279.jpg
6e41879a21375b668d2973d6c2f5073f.jpg
e9c7957b27f907411e4931c14f67c602.jpg
e852d0ef81f3aa05c49eef08cda57788.jpg
6c91409fca6de44761e07658276509de.jpg
609b6d077e9eccd4024ef7790cb3d36a.jpg
c5a78280e8a5edf9eb4b44763c26e923.jpg
414631c1aa112cab9519d57e5b704c49.jpg









Sent from my iPhone using Tapatalk
 
Last edited:

JB_2010GT500

Active Member
Established Member
Joined
May 21, 2014
Messages
419
Location
CT
I was in meetings so I was only able to try calling once and did not get ahold of anyone. I will try again tomorrow and let you know.


Sent from my iPhone using Tapatalk
 

02GTKB

Nolimits
Established Member
Joined
Dec 5, 2008
Messages
3,092
Location
Upstate NY
You will save a lot buying this over a complete kit..If you are wanting to upgrade and save $$$, buy this and get a hold of Van@Revan or Mike@KB they will help you out big!
 

JB_2010GT500

Active Member
Established Member
Joined
May 21, 2014
Messages
419
Location
CT
07BB -

Just spoke with Kenne Bell. They are going to send me a complete parts list with prices, but it may take some time for them to fulfill my request. Here were the big-ticket items he could nail down over the phone:

1. Gimme 5 Intake - $599
2. Boost-A-Pump - $459 (note, a member is listing one for sale for $200: https://www.svtperformance.com/forums/threads/kb-20v-competition-bap.1143377/)
3. Lower Discharge Plate - $400
4. Bypass assembly - Max $299 (my kit comes with the regular vacuum bypass so that will likely deduct from the cost of this)

I'll post back up when they come through with the additional smaller components required to complete the setup.
 

Users who are viewing this thread



Top