14GT base gauge cluster swapped for 14 premium gauges w/track apps.
- Thread starter Monster5.0
- Start date
From my understanding, the Track Key tunes are stored in the ECU. But, you have to have a Dual Path Cluster that allows the 2 separate keys to function properly. The Dual Path cluster was available on both Base & Premium 2014.5 GT's. So you would have to look for a 2014.5 Premium Cluster. I did the swap on my 2013 GT, and I have the Track Cal tune, in order to get the cluster programmed, I needed to remove the Track Cal tune, program for the Cluster, then reload the Track Cal. I do not know if that is the case with the Track Key though.
Swapped my cluster today and had dealer load the as-built data for the two 720 codes and everything works. It had an option for the track key but I told him not to bother, not sure if it would work for an auto car anyway. Would be nice to be able to have one key with my N/A tune then have the other key done for my future nitrous tune.
Last edited:
Im a noob here but very interested in the cluster swap as i have a boosted 13 gt base. I have a few ?'s. If i get a vcm2 can i do everything myself including matching my mileage and also if i get a gt500 cluster how do i get the boost to read? Thanks for any help
The VCM2 will not match mileage. I sent my cluster out to http://www.odo-pro.com to get the mileage set.
Thanks for the reply ive been trying to figure that out before i dive in and spend alot of money cause no one mentions that in there videos. I guess alot of people is just rolling with whatever mileage is on the used cluster they get?
I have another ? I seen on the vcm2 ads it says you have to buy the ability to do pats (program keys) and i guess the as built data also is this true has anyone done this with the cheap programmers i was wanting to buy programmer cause i might need it for other reasons. Thanks
I know keys that are already programmed will not reprogram. So are two new keys required? Also hearing differing reports on what the odo will read when using a salvage cluster. Which will it display? The mileage from the salvage car or your car's actual mileage? If its the former, what is one to do, as I know IDS will not change mileage. My car is a base 14 GT.
Your keys can be programmed to the new cluster.
The cluster will read the mileage of the car it came out of, not the car it is going into.
You can send the cluster to www.odo-pro.com and have the mileage changed.
Thanks for the info on the keys. However, odo-pro.com seems to be "temporarily" out of business.
Well, crap... I had great service from odo pro, I hope he gets his affairs in order. A quick google search for "odometer correction service" pulled up some promising results.
On a '13 & '14, only change these 2 lines of codes for the cluster (ICM).
720-01-01
720-02-01
I used eBay to find a car with the options I needed to get my code, but this is the VIN I used.
1ZVBP8CF3D5260658
Premium/Manual/without back up sensors.
The codes I used were:
720-01-01: F798 EF61 08
720-01-02: F80F 0000 31
Hope this helps!
I have a question. If i have a 2013 base GT with the Brembo package and backup sensors then what options do i need to look fo on the Premium vin? Just the same stuff or do I need to look for a Track Pack car? Also i have a guy telling me that with a 13 or 14 my car there is no need to do anything but the key learn. He says that he and a buddy both have done a few swaps for people on 13 and 14 cars and track apps worked as soon as they programmed the keys. Everything I read says you have to program, but it seems like most of these threads are centered around the 10-12 cars being upgraded....
You only need to find a premium/manual/with back up sensors.
Do the key program then change the 2 lines of as built date and you are good to go.
Sent from my iPhone using the svtperformance.com mobile app
Spenceslim68
New Member
Last edited:
Dieseldoctor
New Member
Dieseldoctor
New Member
Is this a dead thread now or is there anymore insight on this
Users who are viewing this thread
