Weld RT-S 77's are on!

466roller

Active Member
Established Member
Joined
Mar 12, 2014
Messages
554
Location
S. Florida
Finally aquired a set of Weld RT-s 77's for my car to replace my black SVE wheels. Went with 17x10 in the rear and 17x5 fronts. Rear tire is the 305/45/17 ET Street R. Hoping it hooks just as good if not better than my 15's. Have a set of Steeda springs to put install to lower the car just a bit.
Weld RT S-77.jpg
 

Riddick

MERICA
Established Member
Joined
Oct 25, 2012
Messages
2,640
Location
Dayton, OH
That looks sharp! Hopefully you dont plan on installing the Steeda Ultralite springs in the rear. I'm running those and they did not lower the much at all, I think the Sports will give you great look. On the factory 19s I still had a descent gap, with my 20s and a 315/35 out back it has a pretty descent look but the rear tires measure over 28 inches.
 

_Snake_

Well-Known Member
Established Member
Joined
Jan 21, 2014
Messages
3,685
Location
Flo-Rida
Late to the party, but love the wheels and the way things turned out with your car. I had my eyes on the same ones for a long time.
 

fulanititoo8198

Member
Established Member
Joined
Nov 17, 2004
Messages
955
Location
Florida
Finally aquired a set of Weld RT-s 77's for my car to replace my black SVE wheels. Went with 17x10 in the rear and 17x5 fronts. Rear tire is the 305/45/17 ET Street R. Hoping it hooks just as good if not better than my 15's. Have a set of Steeda springs to put install to lower the car just a bit.
View attachment 1260460

That looks great, I like them better than the S71's I had.
 

Riptide

Well-Known Member
Established Member
Joined
Dec 23, 2009
Messages
1,639
Location
Sparks, NV
Nice!

Love mine. Wish they weren't getting beat up driving them on the street. Lots of dings from rocks.
 
Last edited:

oldstv

Well-Known Member
Established Member
Premium Member
Joined
May 28, 2008
Messages
2,263
Location
thomasville ga
I am interested to see if the car hooks as good with the lowering springs as it does now. Aren't those stock springs that you have on there now?
 

466roller

Active Member
Established Member
Joined
Mar 12, 2014
Messages
554
Location
S. Florida
I am interested to see if the car hooks as good with the lowering springs as it does now. Aren't those stock springs that you have on there now?

I've been to the track once since installing the springs. The car is consistently in the 1.40-1.41. Trying to launch harder and it just spins. The track prep isn't great since I usually go on a test and tune night and there are alot of street cars. I'm shooting for mid 1.3's, may have to throw a 69 pulley on it! Mod Nationals should be good for a new P.B.!
 

Users who are viewing this thread



Top