Terminated Bullitt

Corbic

Well-Known Member
Established Member
Premium Member
Joined
Apr 14, 2015
Messages
10,937
Location
Desert Oasis
I believe a stock 01 Bullitt weighed a little under 3200lbs and a 03 svt just over 3600lbs.

At 3400lbs and 700+ hp that's better power to weight than a ton of cars even when modified.

Bullit was 3,350.

Cobra put on weight from DOHC (+50lb), T-56 (+50lbs), Eaton (+100lb) and IRS (+100lbs).

(More or less)
 

ON D BIT

Finish First
Established Member
Joined
Jul 7, 2003
Messages
16,212
Location
Currently in Sonoma County
The 03 svt was 3650 plus minus.
My 03 Mach 1 shipping weight 3327 or their abouts. With full tank it would be just over 3400lbs.
According to Bullitt archive it's weight is 3273.
I was off by 100lbs.
 

Jmccormick

TERMN8D
Established Member
Joined
Nov 25, 2006
Messages
1,579
Location
Monroe MI
Just read the entire thread, cover to cover. Great stuff in here man!

Bullit was 3,350.

Cobra put on weight from DOHC (+50lb), T-56 (+50lbs), Eaton (+100lb) and IRS (+100lbs).

(More or less)

The 03 svt was 3650 plus minus.
My 03 Mach 1 shipping weight 3327 or their abouts. With full tank it would be just over 3400lbs.
According to Bullitt archive it's weight is 3273.
I was off by 100lbs.


I'll get the car weighed.

It's iron block 4v so it'll be a tad heavier than the 2v. It's running tubular front suspension, but I also have turbo piping and a couple turbos hanging off the front. But then there isn't much exhaust piping which weighs a few pounds. It is a T56 and IRS car though.

Lot's of variables, you guys peaked my interests. I'll have to weigh it.
 

Corbic

Well-Known Member
Established Member
Premium Member
Joined
Apr 14, 2015
Messages
10,937
Location
Desert Oasis
The 03 svt was 3650 plus minus.
My 03 Mach 1 shipping weight 3327 or their abouts. With full tank it would be just over 3400lbs.
According to Bullitt archive it's weight is 3273.
I was off by 100lbs.

Ultimately it doesn’t matter. All the SN cars way the same. The difference is in the equipment. Cobra swap a Bullitt and it will weight the same as a Cobra.

Mach 1 has an Alumium Block, no-S/C, lighter transmission and SRA.
 

Jmccormick

TERMN8D
Established Member
Joined
Nov 25, 2006
Messages
1,579
Location
Monroe MI
That is absolutely beautiful


Get a picture with the front bumper off and the twin choochers exposed in full glory.

Old pic, i'll get a new one though lol

CF691D57-BAF1-48E3-832D-51274B690FC1_zpsxdsa9rg6.jpg
 

Users who are viewing this thread



Top