Does anyone recognize this DTC readiness situation?

Levix

New Member
Established Member
Joined
Oct 25, 2012
Messages
28
Location
Atlanta
I've read all the emissions and driving cycle threads, looking for greater detail on the readiness monitors, and what they should look like when all complete. Car has a VMP stage 2 TVS, stock exhaust up to muffler deletes.

Been back and forth with VMP trying to figure out if the tune is setup properly for emissions, they have given up stating everything for emissions is stock (all sensors turned on, adaptive learning turned on).

I can't get O2 Sensor and O2 Sensor Heater to complete. What I find odd is the daily driving cycle will progress to 1 of 2 different situations shown below. In one situation the incomplete sensors change to "not avail".......which is odd.

1) Does anyone have a screenshot of what it looks like when everything is green? Do the o2 and o2 heater statuses normally change to "not avail"?

2) Anyone else have issues passing with a blower? Normally I would just load the stock tune, but with the larger fuel injectors I figured I'm not able to run the engine on the stock tune (let alone drive it around on the stock tune)

Screenshot_20180205-075209.png

Screenshot_20180205-170114.png
 

Levix

New Member
Established Member
Joined
Oct 25, 2012
Messages
28
Location
Atlanta
Well, I was one day too early in posting the question. Monitors finally turned ready. Took 1 week of driving to/from work.

Here's the readiness state. Apparently the sensors are supposed to flip to "not avail"
 

Attachments

  • Screenshot_20180209-103641.png
    Screenshot_20180209-103641.png
    1.8 MB · Views: 165

Mojo88

"Hammer" Time
Established Member
Joined
Jan 30, 2017
Messages
1,319
Location
RI
Will this pass emissions now? There are a lot of items that say "not avail" under the 'drive cycle' tab.
 

Users who are viewing this thread



Top