Holley Systemax intake gaskets

Dbrd_5.0

Member
Established Member
Joined
Sep 3, 2016
Messages
40
Location
Corpus Chrisi,Tx
Looking for a little help, I just bought a slightly used Holley systemax intake manifold for my foxbody 5.0. And I’m trying to find the gaskets for the lower to the heads and the upper to lower. Is there any particular gasket that needs to be used? Or do they sell a replacement kit? Car has Patriot aluminum 185cc heads larger ports I’m assuming.
 

Dbrd_5.0

Member
Established Member
Joined
Sep 3, 2016
Messages
40
Location
Corpus Chrisi,Tx
IMG_0367.jpg



Sent from my iPhone using the svtperformance.com mobil
 

BLKFOX

Active Member
Established Member
Joined
Apr 28, 2011
Messages
1,366
Location
Indiana
About a year or so ago I believe that I bought CJ Ponypart's last two that they had. If you contact Holley direct I believe they can help you. It's also the same as the Vortech/Saleen intake if you can find some of the OEM gaskets, they're a nice piece.

Trickflow also sells a phenolic spacer kit for these intakes, which comes with two gaskets.

On the lower intake to head gaskets, I used the recommended gaskets that AFR suggested. You could also trim the gasket around the ports if needed.
 

Dbrd_5.0

Member
Established Member
Joined
Sep 3, 2016
Messages
40
Location
Corpus Chrisi,Tx
About a year or so ago I believe that I bought CJ Ponypart's last two that they had. If you contact Holley direct I believe they can help you. It's also the same as the Vortech/Saleen intake if you can find some of the OEM gaskets, they're a nice piece.

Trickflow also sells a phenolic spacer kit for these intakes, which comes with two gaskets.

On the lower intake to head gaskets, I used the recommended gaskets that AFR suggested. You could also trim the gasket around the ports if needed.

Nice! Thanks a lot buddy. Going to give that a try.


Sent from my iPhone using the svtperformance.com mobil
 

Users who are viewing this thread



Top