Ford Coyote CJ intake

Twinturbo Ranger

Member
Established Member
Joined
Nov 26, 2000
Messages
694
Location
Tyler,TX,USA
SOLDI’ve decided to sell the CJ intake I used with my 5.4 DOHC. Please note there are a few modifications. There are three hose inlets that have been swapped to 6AN fittings. All the fittings have been JB welded to the intake. There is also a 3/8 NPT hole under the intake directly behind the TB which I used for a IAT sensor. The mounting flanges (head) were massaged on the outside to clear the heads, and right behind the #4 Injector I checked to see if the Intake could be clearance’d for a set of Holley injectors (it couldn’t). The bolts will only go in the head about a 1/2 inch since they were used with intake adapters. All the bolts, gaskets and harness is included.SOLD


$600 shipped for the intake


Thanks Mike
 

Attachments

  • 0A41C762-7843-4FD5-8DC0-430E817392A2.jpeg
    0A41C762-7843-4FD5-8DC0-430E817392A2.jpeg
    266.9 KB · Views: 245
Last edited:

Users who are viewing this thread



Top