What's up guys? I am about to continue on my 04 mustang build and I thought I would put the build up for others to see and for recommendations and advice. The car is being built for NASA, SCCA, autocross, etc. I know there are better cars to choose from and some of the cars are built racing chassis cars worth 100k and that's ok. I don't have lots of money to spent but I will spend what I can, as it comes and still be competitive and fun.
So as the car sits:
2000 Cobra R springs, struts, and shocks
BAER 4 piston calipers in front Motul fluid
4.6 sohc kenne bell 2.1 about 400/440rw
Full tilt boogie complete irs kit cc plates
Torsen tr2 diff
Complete interior gut, batt in rear, a/c delete
Heater core delete, no abs
T56 magnum
Worn out nitto 555
Weight about 3300-3400lbs
Best time at NOLA 2:04
I believe that is it. I will get pics later on. I have a bit of cash coming my direction and wanted to get back on the mustang. It is between 6k and 8k. I was thinking of a MM k member kit, MM front coil over setup, MM solid motor mounts, long tubes, tires(if not wheels and tires) and I am open to suggestions for other stuff in the buget. There is a lot of work to do but I am committed to going all out this car and racing with it. In between some mods, I will finish hpde 3 and 4 and hopefully by then the car will be 100% ready for sanctioned racing. Oh no 4 valve or coyote swap yet. Gonna build a high compression, high rpm 2 valve screamer. E85 only
So as the car sits:
2000 Cobra R springs, struts, and shocks
BAER 4 piston calipers in front Motul fluid
4.6 sohc kenne bell 2.1 about 400/440rw
Full tilt boogie complete irs kit cc plates
Torsen tr2 diff
Complete interior gut, batt in rear, a/c delete
Heater core delete, no abs
T56 magnum
Worn out nitto 555
Weight about 3300-3400lbs
Best time at NOLA 2:04
I believe that is it. I will get pics later on. I have a bit of cash coming my direction and wanted to get back on the mustang. It is between 6k and 8k. I was thinking of a MM k member kit, MM front coil over setup, MM solid motor mounts, long tubes, tires(if not wheels and tires) and I am open to suggestions for other stuff in the buget. There is a lot of work to do but I am committed to going all out this car and racing with it. In between some mods, I will finish hpde 3 and 4 and hopefully by then the car will be 100% ready for sanctioned racing. Oh no 4 valve or coyote swap yet. Gonna build a high compression, high rpm 2 valve screamer. E85 only