N2MB Wot Box Help | Activates on brake too.

So I have an N2MB Wot Box on my 2004 Mach 1. Everything is decent except for I think my clutch switch may be loose because I have an intermittent problem where I have a rev limiter in gear/neutral as well without the clutch being pressed. That is not my main problem, but if I could get help with that as well it would be great.

My main problem is that my rev limiter (2 step) engages when I press the brake as well. This is a problem because I have my 2 step set at 4k rpm and am not able to do a burnout as the rev limiter kicks on.. If someone could shed some light on this, that would be fantastic.

Thanks,

Abel

Had an issues like that before. Clutch pedal needed adjustments and new switch. Switch was worn and cracked.

Also was causing problem with the cruise control, think the clutch pedal was depressed.

Clutch pedal was adjusted to far down, activating the switch. Had aftermarket cable / adjuster. Adjusted til pedal was off switch. come to find out. switch was stuck in engagement.