New wheels, but will they fit?!

Ingo Castilho

New Member
Established Member
Joined
Mar 3, 2019
Messages
20
Location
Florida
Im looking to purchase the Carroll Shelby CS-14 Wheel 20"X9.5 / 20"x11 for my 2010 GT500.
However i have heard it said that the 2010-2014 mustangs should not go wider than 9.0 in the front or you will get rubbing when making a tight turn. Also the offsets for these are
Offset: +40mm front and +50mm rear. Which leads to me worry that they will be sticking out past the wheel well, ruining the look. Was wondering if anyone has these on their GT500 or if you happen to know these measurements wont be an issue.
Below is a link to the wheels themselves.


https://www.cjponyparts.com/carroll...wheel-20-x11-gloss-black-2005-2019/p/W1036-V/

Much appreciate any info on this.
 

Ingo Castilho

New Member
Established Member
Joined
Mar 3, 2019
Messages
20
Location
Florida
I'm lowered, running a 10" front Alcoa, with a 275/35 tire for comparison. No problems.
ok, sounds like there should be no issue than. I see you are running 11.75"x315/30 in the rear what are the offset on those and do they happen to stick out past the wheel well? im trying to keep a flush look. Also Nice GT500, killer color combo.
 

merkyworks

Well-Known Member
Established Member
Joined
Apr 5, 2016
Messages
980
Location
Houston
Running 10" front Signature SV103 wheels with 285/35/20 tires. Ground to front fender edge is 28" and have no issues with front tire rub.
 

Ingo Castilho

New Member
Established Member
Joined
Mar 3, 2019
Messages
20
Location
Florida
Running 10" front Signature SV103 wheels with 285/35/20 tires. Ground to front fender edge is 28" and have no issues with front tire rub.
I see, ok than im confident i wont have issues with rubbing on these wheels. My only concern now is the rear wheels with an offset of +50MM, really want to keep the wheels tucked in the wheel well. Dont mind going to the very edge but dislike the sticking wheels out from behind look. If you dont mind me asking, what width and offset are your rear wheels?
 

COOL COBRA

Hell Yes!
Established Member
Joined
Nov 23, 2012
Messages
4,671
Location
Southern Mo.
I see, ok than im confident i wont have issues with rubbing on these wheels. My only concern now is the rear wheels with an offset of +50MM, really want to keep the wheels tucked in the wheel well. Dont mind going to the very edge but dislike the sticking wheels out from behind look. If you dont mind me asking, what width and offset are your rear wheels?
My rears are a different story. I had my 9.5 front widened to 11.75 for the rear & run a 315/30/20.
Then I put my 10" rear, on the front.
I don't have the specs at hand on what the backspace & offset was after the modification.
 

Users who are viewing this thread



Top