Ported lower should be +15-20 and the Gen 2 vs gen 1 should be +15. Although the 6R80 is costing me 35-40 whp. So I would say its a wash. It took 21* of timing to get 755, at 18* of timing I was at 738 SAE.
ATI 10% lower and 2.5 upper pulley installed
- Thread starter evasive
- Start date
Ported lower should be +15-20 and the Gen 2 vs gen 1 should be +15. Although the 6R80 is costing me 35-40 whp. So I would say its a wash. It took 21* of timing to get 755, at 18* of timing I was at 738 SAE.
No, just 93 but larger injectors, BAP, fuel rails. I would 100% change to the large carbon 127mm JLT CAI if you can find one. My 123 intake was maxed out. The tune was significantly smoother with the bigger JLT intake plus there was a nice gain.
Well when me and my tuner were lookin at the numbers the only thing that was near being maxed out were my injectors which was at 90% if I remember correctly, other than that everything had room to do more. Which injectors are you running?
Sent from my SM-N960U using Tapatalk
Users who are viewing this thread
