Saving weight: Antigravity battery + Morris Engineering

Thank you for that update. I need to get around to ordering this battery setup.

I can't imagine the small amount of weight change would make the handling any different, still a great mod though...

I saw you mounted the battery in the traditional orientation. Would it be possible to mount it along the fender between the firewall and strut tower?

cholmes1 said:

I saw you mounted the battery in the traditional orientation. Would it be possible to mount it along the fender between the firewall and strut tower?

Click to expand...

Only with a custom bracket / mount / holder.

cholmes1 said:

I saw you mounted the battery in the traditional orientation. Would it be possible to mount it along the fender between the firewall and strut tower?

Click to expand...

I used the factory tray and strap but had to mount a piece of plastic to the tray to act as a floor for the battery as if I did not, the battery actually is small enough to fall into the trays cavity. I also drilled out the rivet holding the strap and then shortened it up and attached the strap with a stainless bolt and large washers.

Just saw this on the Antigravity Website but based upon the feedback here I'm guessing the Restart will be the right choice. Also....did you guys also purchase the larger automotive battery terminal adapters or are they in the box?

Jam421 said:

Just saw this on the Antigravity Website but based upon the feedback here I'm guessing the Restart will be the right choice. Also....did you guys also purchase the larger automotive battery terminal adapters or are they in the box?

Click to expand...

You will need the post style battery terminals, they are not included.