Yes CNC ported GT heads with stock valves. Can you not find a 350/300 yote?Right. The pic you posted was of CNC heads.
Ur not that bright are you?
Sent from my iPhone using the svtperformance.com mobile app
Yes CNC ported GT heads with stock valves. Can you not find a 350/300 yote?Right. The pic you posted was of CNC heads.
Ur not that bright are you?
Sent from my iPhone using the svtperformance.com mobile app
Dyno jet sae doesn’t exist, ass clown response shows you have no clue what you’re talking about
For a max port stage 5 port job you still don’t get 400cfm. That’s nothing you’ve ever seen in person.
Stage 3 is max effort street car port, and it’s [email protected] lift. To go along with that is a lack of low end velocity. Here’s my graph on 30psi. Notice the low end velocity is... absent. As I said pages ago, had I done my build with coyote architecture, I’d have 50-100whp on top, and another 100wtq down low.
View attachment 1593807
Here’s 10.75psi pump gas
View attachment 1593806
Do you know what a stage 3 port looks like?
View attachment 1593809
View attachment 1593810
View attachment 1593811
That right there is MY $2500 heads with a $4000 port job.
Here they are with another $5k of cams, retainers, guides, Seats, valves, springs, reluctor wheel, (and valve covers, chains, tensioners etc not in the pic.)
View attachment 1593812
Get a ****ing clue guy. You want to call the guy who already did the shit that he’s wrong. Hahahhahhhh.
Yes CNC ported GT heads with stock valves. Can you not find a 350/300 yote?
Yes CNC ported GT heads with stock valves. Can you not find a 350/300 yote?
Hey Coyotard.Hey sharpie
I AM TALKING STOCK PARTS!
Never mind...
Sent from my iPhone using the svtperformance.com mobile app
Lol it’s a oem head casting with a port. I am not bending rules for one and not the other. Gimmecoytard just can’t comprehend that yote heads are not the best modular heads.Kinda coming off as a chev guy man.
No it’s stock, just heads and cam....
Sent from my POFS iPhone in a rage cause this is the third try.
You are a stage 6 retard. DJ uses the SAE correction factor. Lack of low end velocity lmfao
Hey Coyotard.
YOU GOT OWNED
Lol it’s a oem head casting with a port. I am not bending rules for one and not the other. Gimmecoytard just can’t comprehend that yote heads are not the best modular heads.
Lol it’s a oem head casting with a port. I am not bending rules for one and not the other. Gimmecoytard just can’t comprehend that yote heads are not the best modular heads.
Pretty sure I am being trolled right now. Nobody is really this dumb. John would probably laugh and walk away if you came at him with that BS lol
I have no care to build either at the moment.Ask John to build you a big bore stroker or any 5.8
I’ve called him on the phone and gotten his feedback on big bore strokers and long strokes. Have you?
I have no care to build either at the moment.
Btw I made more power than you with a 2650 on 25 #. Let that sink in lmao
You say you are playing with Fire in your post? Would you like to run me? 1/4 mile on a track All legalTheoretically, we can push this stock 5.8 block to 1000whp as many have haha, especially in how you drive it etc. I have certainly pushed mine farther than what one would drag race this car quite often. Keeping the rpms at or below 6200, good fuel and tune you can push her where ever you desire (NOT RECOMMENDED)..I have yet to get this new setup to a legit dyno, but I know you have hit low 800s to the wheel with just a 3.5 upper.. I have almost a full 1/2" smaller pulley than what you ran, so I am playing with fire so to speak and I know this. Hence why my car only has 5,600 miles on it.