axle seals

keith89

Well-Known Member
Established Member
Joined
Mar 29, 2007
Messages
1,479
Location
Easton, PA
I'm doing some preventatitve maintenance on the GT. It was upgraded with Moser 31 spline axles and I want to replace the axle bearings and seals while i reseal the diff and change the fluid. Are the stock axles and moser 31 splines the same diameter? ie. are the axle seals and bearings the same. Ford racing part number: M-1225-B?
Or is there a better option?

Thanks
 

Sluggie24

Active Member
Established Member
Joined
Jan 12, 2017
Messages
277
They are the same diameter at the seal/bearing end so they both use the same bearings and seals
 

me32

BEASTLY SHELBY GT500 TVS
Moderator
Premium Member
Joined
Sep 6, 2005
Messages
18,457
Location
CA,NorCal
I'm doing some preventatitve maintenance on the GT. It was upgraded with Moser 31 spline axles and I want to replace the axle bearings and seals while i reseal the diff and change the fluid. Are the stock axles and moser 31 splines the same diameter? ie. are the axle seals and bearings the same. Ford racing part number: M-1225-B?
Or is there a better option?

Thanks
Yes use oem ford seals and bearing. They are the same diameter.
 

keith89

Well-Known Member
Established Member
Joined
Mar 29, 2007
Messages
1,479
Location
Easton, PA
thanks all good now. axles still had the oem seals with the flange. what a pita to remove. They had some orange sealant holding them in. bearings came out easy once the seals were removed.
 

Users who are viewing this thread



Top