Chicago- Black 2004 Coupe Low miles, Well Built.

boost21

boooooost
Established Member
Joined
Mar 31, 2009
Messages
494
Location
Chicago burbs
Thinking of selling my 2004 Cobra. The car has 29,XXX Miles on it currently and I have owned it for almost 8 years. I am the third owner and personally knew both previous owners. The car needs nothing, I just have had a lot of priority changes since I bought my house and the last 3 years I have driven the car probably a total of 100 miles. This summer I only drove it to get fresh gas in the spring and once in June after changing the oil.


I have been back and fourth for a couple years now so I figured I would see if anyone is interested. As noted before the car is a 2004 and has 29,XXX Miles on it. Its a Black Coupe if you cant tell and the top of the roof and top of the spoiler is wrapped in 3m satin black, but the paint underneath is the same as the rest of the car. There are 2 small scratches on the paint that I can show if needed and the heat/ac work as they should.


The Whipple and fuel system was installed spring of 2014 and was tuned by Tim Barth and made 595 whp and 565 tq at 19# on 93 pump gas. I only had a couple track visits with the Whipple and the best I managed was my last visit and ran an 11.2 at 132 MPH back in 2016. The whole setup has maybe 1-2,000 miles on it. The tune has been great with the exception for an intermittent rpm fluxuation of about 100 RPM when the car is warm. It always annoyed me but doesen't affect anything relating to starting/driving.


I have a binder full of receipts and information that came with a good chunk of the parts. I should have the stock headlights, tail lights and other misc stock stuff stored in my attic that I will have to pull down and sort out. I am looking for $27k for the car with the stock seats and the 18" FR500 wheel setup.


I do have the Weld RTS wheels/tires and a Corbeau seat package that could be negotiated in at an additional cost. The stock seats were removed back in 2012 and stored indoors so they are mint. I am located in the burbs of Chicago. Clean title in hand. Not really looking for trades but might consider something + cash. Would entertain a nice f-body, C6, Older EFI LS swapped truck or 69 Camaro RS/SS. Not wanting anything really modified.


The car has no rust or any known defects. I have hundreds of high resolution pictures that can be shared and I would gladly answer any questions relating to the cars history. The car has passed Illinois emissions testing and has no check engine lights.


I have tried to keep a detailed mod list as seen below. I am sure there is plenty of small things missed.


Performance:


2.3 Whipple Supercharger

AccuFab Single Blade Throttle Body

3.2 RR Upper pulley

Bassani mid-length ceramic coated headers

Oxygen sensor extensions/EGR deleted

Bassani cat back exhaust

Bassani X pipe (bolt in cats currently removed but included)

Ford Racing locking header bolts

Metco lower interchangeable pulley – 4 lb.

Reichard Racing belt tensioner w/spring assist

Reichard Racing idler pullies (dual ball bearing)

Reichard Racing custom snub idler using a Billetfow idler bracket and RR 100mm pulley

Metco alternator pulley - 3.5"

JLT Hi-Boost cold air intake - black

SCT SF3 powerflash tuner

Mafia mass air flow meter extender by Diablosport

NGK TR6 spark plugs #4177

Steeda oil separator



Engine Cooling:


Hypertech Powerstat coolant 160 degree thermostat

Precision Fabrication intercooler coolant tank reservoir - polished with fuel cell cap

Votion Speed custom front heat exchanger

Lightning Force Performance Race Radiator

Evenflow head cooling mod

LDC cooling mod kit



Fuel:


80# Seimens Deka injectors

Division X fuel pressure regulator

2 Walbro 255lph fuel pumps

Division X Billet fuel hat

Division X Fuel Gauge mounted to rail

Fragola PTFE fuel hose return


Brakes:

SP Performance drilled (radius chamfered) and slotted and nickel cadmium plated brake rotors-front and rear

Hawk HPS (High Performance Street) brake pads-front and rear

Russell stainless steel brake lines-front and rear

Kenny Brown front brake duct cooling kit with 600 degree high temp silicone ducting

ATE Super Blue DOT 4 racing brake fluid

Speed Bleeders-front and rear


Transmission:


Tremec 26 spline T56 input shaft

Billet retainer tube

Flydanza aluminum flywheel

Promotion 750hp Clutch kit

Ford Racing Throw out bearing

Ford Racing Pilot Bearing

ARP Flywheel Bolts

MGW shifter

Fiore firewall adjuster and clutch quadrant kit

LDC clutch freeplay correction kit

Maximum motorsports HD clutch cable

M GW shifter dust boot (trans silencer)





Suspension:


Kenny Brown Extreme Matrix subframe system

Kenny Brown rear tower brace

Kenny Brown forward IRS torque brace

Steeda COBRA IRS differential brace

Steeda IRS subframe reinforcing bracket

Kenny Brown urethane IRS rear differential bushings

Steeda IRS urethane subframe bushings

Steeda urethane rear IRS control arm bushings

Full Tilt Boogie Double Adjustable Endlink Kit.

Steeda Front bumpsteer kit

Maximum Motorsports sway bar end links - lowered

Maximum Motorsports caster camber plates

Maximum Motorsports Bilstein front struts - heavy duty valving

Maximum Motorsports Hypercoil coil over springs - 275lb - 12 in

Maximum Motorsports front coil over kit

Maximum Motorsports tubular K-member

Maximum Motorsports front control arms-urethane-standard offset

Maximum Motorsports spherical steering rack bushings

Driveshaft Shop Level 5 halfshafts

Eibach Rear Springs

Energy Suspension engine mounts

Viking Double Adjustable Rear Shocks

JDM Engineering pinion snubber

Ford Racing (HPM) HPM-4000 drive shaft safety loop



Exterior mods:


Staggered 18” FR500 wheels

315 Mickey Rears/ 275 Falken Fronts. Lots of tread, tires are a little older.

Black Svt Trunk Badge

Mirimoto Bixenon HID Projector Retrofit

6000k HID foglight bulbs

Aluminum side scoop grilles

UPR billet aluminum antenna delete

Pro-fit custom fuel door

UPR stainless steel bumper inserts in polished finish

Tinted Tail Lights

UPR Windshield wiper deletes

Harwood Cowl hood

Hand polished IRS tails

Gas tank Cover Painted Gloss Black

Glenns Performance Polished fuel tank straps





Interior:


Cobra embroidered floor mats

SCCA seat belt lock

Autometer lunar boost gauge

Autometer lunar fuel pressure gauge

AEM Wideband gauge

Autometer steering column pod

Speed of Sound A-pillar gauge pod

Valentine V1 Radar System with remote display flush mounted to the shifter bezel

Concealed Volt gauge mounted on dash in clock location


Audio:

Pioneer 130 BT Double Din radio with navigation

Kenwood KFC-X1300P eXcelon 5-1/4 Inches Component SpeakerS

Boston Acoustic SL80 5x7" 2-way component plate-type rear speakers

JL Audio JL500/5 500 watt 5 channel amp

JL Audio JL3002 300 watt amp

JL Audio 10W3V2D4 10" subwoofer

Monster Performance Car - 4 gauge amp power kit

Monster Performance Car - battery connectors

Monster Performance Car - misc. cables, harnesses, etc.

All monster cable and JL Audio wiring and adapters and bldg. material. Car has been dynomatted. The 5 channel amp

Is currently not connected as the amps and subs were removed when I went to the track last time but all the wiring is still there. If you do not want the sub/amps they can be removed.


Dress up:

Steeda billet oil cap

Steeda Gloss Black radiator cover

Steeda billet shifter bezel

Steeda billet door/window switches

Steeda door handles

UPR billet aluminum EGR and vacuum module covers in polished finish

UPR billet aluminum designer bolt caps (10mm and 3/8) in polished finish

UPR billet aluminum designer bolt caps (8mm and 5/16) in polished finish

UPR billet aluminum hood bolt caps in polished finish

UPR billet aluminum designer bolt caps (8mm and 5/16) in polished finish

UPR billet aluminum tilt wheel lever in regular style, satin finish

UPR billet aluminum door pins and bezel (in polished finish)

UPR billet aluminum gauge bezel in satin finish

UPR billet aluminum large cup holder

UPR billet aluminum cigarette lighter delete

MGW turn signal knob

MGW Gripper shift knob

LFP radiator reservoir - polished

LFP power steering expansion tank - polished



Misc:

GRC Optima battery billet hold down for Optima red top under hood

Optima Red top battery

Viper 2-way pager alarm

MRT hood strut kit - black

Powered By SVT supercharger emblem


e7f2b336edfef490e77e8ea76eb23bc9.jpg



718791d8ba8ccab386c8dce5b55c6cc5.jpg



d734cd920e0f41b9e0304a20cc3b2063.jpg



268263c73be2aa08e6d9771deadd0936.jpg



0b104f8c5d2305759ac05d92918dab1d.jpg



e719453208116c271f6a5d67cd2d54cd.jpg



6e2aa1dc07eb4c68488004e1b23ac67d.jpg



e7d4fda0a6fc86c12d470ff0531359c0.jpg




9ec6e93a41f045df4ad07159613759bb.jpg



7c4b67766d25291877e0f950d1510524.jpg



d97e0f4ad35328aeafe4c280e494c651.jpg



131840479d50f112a82485572ceba735.jpg



a5208223a53a74f2182a3fd5133448e6.jpg
 

07gttom

Member
Established Member
Joined
Oct 25, 2014
Messages
63
Location
Nj
I have a binder full of receipts and information that came with a good chunk of the parts. I should have the stock headlights, tail lights and other misc stock stuff stored in my attic that I will have to pull down and sort out. I am looking for $27k for the car with the stock seats and the 18" FR500 wheel setup.
 

Junior1981

New Member
Joined
Sep 3, 2017
Messages
4
Beautiful....been waiting for a terminator like this for a long time. I live in Chicago, 2 miles from O'hare. What are you looking to get price wise? P.M. me to discuss more.
 

boost21

boooooost
Established Member
Joined
Mar 31, 2009
Messages
494
Location
Chicago burbs
Sorry don’t get on here too much, work has been busy. Here is the pic for the rules

f43afcda6af1b70d939d00b182d9389a.jpg



Sent from my iPhone using Tapatalk
 

boost21

boooooost
Established Member
Joined
Mar 31, 2009
Messages
494
Location
Chicago burbs
Don’t know how to update the post but I put the stock seats back in as well since most seemed to like them better. The corbeaus are now in my fox
261c2f1e0b419db599256f75581df38e.jpg


99ee50288d412e07c414c4d270fbdae9.jpg



Sent from my iPhone using Tapatalk
 

Users who are viewing this thread



Top