It includes complete block assembly, engine computer, engine harness, intake, s/c with 3.10” pulley, lower pulley and idlers, Accufab throttle body, custom in-fender CAI, BBK LT headers, catted X-pipe (& Steeda catback if you want it), intercooler/pump/reservoir, alternator, p/s pump, starter, aluminum flywheel, Exedy 500 clutch, and most of the plumbing and tubing. We have tried to save all of the bolts and nuts. This is a complete motor less radiator, fan, motor mounts, bell housing, and transmission.
New pistons, rings, bearings, and timing chains. Replaced crank, some of the valves. Resurfaced heads, vacuum tested, checked for cracks, engine balancing. Honed bore (2 have cylinders have slight skirt scuff). Prior to pulling the motor, it was dyno’d at 458 rwhp and 470 rw tq.
The motor has not been completely assembled so that it is easier to transport with less chance of breaking or bending something. I will deliver anywhere in VA, MD, DC, and the northern half of WV as long as you can lift it out of the truck. Otherwise, shipping is on you. The motor can be seen at Mid Atlantic Performance in Chester, VA.
New pistons, rings, bearings, and timing chains. Replaced crank, some of the valves. Resurfaced heads, vacuum tested, checked for cracks, engine balancing. Honed bore (2 have cylinders have slight skirt scuff). Prior to pulling the motor, it was dyno’d at 458 rwhp and 470 rw tq.
The motor has not been completely assembled so that it is easier to transport with less chance of breaking or bending something. I will deliver anywhere in VA, MD, DC, and the northern half of WV as long as you can lift it out of the truck. Otherwise, shipping is on you. The motor can be seen at Mid Atlantic Performance in Chester, VA.