Lund Racing 2020 Shelby GT500 makes over 760rwhp with simple mods!

PIPO said:

Here’s another tuned GT500 by an unknown, at least to me, shop.

Baseline - 644
Tuned - 770
Mods: cat delete, race gas and tune

Click to expand...

Color me skeptical

Good way to drum up business


There is a full write up in a different section, that details out everything.

https://www.svtperformance.com/thre...500-makes-over-780rwhp.1181784/#post-16337749


691rwhp stock, but they wrung 78xrwhp running out to 8K. Nice!

tt335ci03cobra said:

Only crappy part is it shifts at ~135Mph~ into 4th gear.

Click to expand...

Probably a stupid question but once it's in third, could you mash the M button and prevent the upshift?

kilomikebravo said:

Probably a stupid question but once it's in third, could you mash the M button and prevent the upshift?

Click to expand...

What for ? Car will be bouncing off the rev limiter if you do that

Looks like Lund just made 803rwhp on E85 , still stock boost

gofast15 said:

Looks like Lund just made 803rwhp on E85 , still stock boost

Click to expand...

Unreal. I figured this car would respond insane mods.

I'm assuming now you would need a tune for the engine and transmission? Probably much more expensive and complex.

gofast15 said:

What for ? Car will be bouncing off the rev limiter if you do that

Click to expand...

GoFast: The person who posted the complaint obviously didn't want the car to shift into fourth. I was assuming he could make it through the lights in third and after that, it doesn't matter what the car does, the throttle will come back anyway.

However, if he couldn't make it through the lights in third, the original complaint goes out the window.

I’m saying 7500rpm at 135 in 3rd is frustrating because adding power means a shit right at the trap basically so not a prevelant gain, if one were to short shift, huge power drop because of linear nature.

I love seeing 800whp/8krpm with just a tune, fuel, o/r mid pipe, and air box pulled.

Assuming a healthy 1.5 60ft on a drag radial, it’s mid 9 second capable right there. 9.5@140+ easy.

Honestly, just 8k rpm tune, e85 and drag radials should do very well.

Best Part is all they needed for E85 was Injectors