What’s the going price for a sn95 with terminator swap?

mineslouder

Member
Established Member
Joined
Aug 16, 2006
Messages
273
Location
GA
Was wondering what the sn95 cars with a terminator swap are going for. I am thinking about selling my 97 cobra with full terminator swap and was wanting peoples opinion on a good price for it. Info below pretty clean car for the most part. Paint is ok, does have a few spots on rear bumper that looks to be cracking but other than that it’s a very sharp car.


1997 white Ford Mustang cobra terminator swapped. Black leather interior. Complete drivetrain swap out of 04 cobra which includes Terminator 4.6 supercharged motor. Tremec t-56 6 speed transmission and independent rear suspension. (IRS suspension)
No expense was spared and the swap was done right. Looks like it came from the factory. The swap included the 04 tank and complete wiring harness for motor and car. It has the 2004 dash and console.
Modifications include:
Stiegemeier ported Eaton blower,
Metco 2.7. Upper pulley,
Metco 4lb lower pulley and stock ring single, Metco 90mm idler pulley,
60lb Siemens Deka EV6 injectors,
Kenne bell Boost a pump
jLT Intake,
BBK Ceramic Long Tube headers,
Off-road X-Pipe
Bassani Cat Back.
SLP loudmouth mufflers.
ShifterSpec Stage 3+ Clutch,
Polyurethane IRS Bushings,
Eibach Springs.
Dual pillar gauge pods Boost and air/fuel digital.
Clear corner lights
Led headlights, fog and corners.

17x9 cobra wheels with nitto 555 front
17x10.5 on rear deep dish with brand new Mickey Thompson drag radials 315/35/17.
Will also come with TWO 17x10 rear wheels with Mickey Thompson e2s with 275S on them.
Have a extra set on black leather seats to go with it also that are also in fantastic shape.

Car runs great and setup only has 71000 miles on it.Car makes 572 rwhp. Car is extremely reliable and can drive it anywhere. Black leather interior.
 

Corbic

Well-Known Member
Established Member
Premium Member
Joined
Apr 14, 2015
Messages
11,342
Location
Desert Oasis
Well most people hate the SN95, although I prefer them to most Mustang generations.

A similar Terminator is around $25k.

Ask $20k, be happy with $15k?

Eventually foxes are going to be $20k cars and that's going to rise the tide for thr SN95 and NE.
 

Deceptive

Muffin is my spirit animal
Established Member
Premium Member
Joined
Feb 10, 2011
Messages
13,556
Location
Nashville, TN
I think it will be hard to truly gauge price with a lot of uncertainty in the country.

Could get good money as people want to snatch stuff up before we are all driving Jill Biden’s and Barack Obama’s dildos.

Could get shit because people know gas is about to start that climb.


Sent from my iPhone using svtperformance.com
 

Adower

Well-Known Member
Established Member
Joined
Sep 3, 2005
Messages
2,807
Location
SAC
Was wondering what the sn95 cars with a terminator swap are going for. I am thinking about selling my 97 cobra with full terminator swap and was wanting peoples opinion on a good price for it. Info below pretty clean car for the most part. Paint is ok, does have a few spots on rear bumper that looks to be cracking but other than that it’s a very sharp car.


1997 white Ford Mustang cobra terminator swapped. Black leather interior. Complete drivetrain swap out of 04 cobra which includes Terminator 4.6 supercharged motor. Tremec t-56 6 speed transmission and independent rear suspension. (IRS suspension)
No expense was spared and the swap was done right. Looks like it came from the factory. The swap included the 04 tank and complete wiring harness for motor and car. It has the 2004 dash and console.
Modifications include:
Stiegemeier ported Eaton blower,
Metco 2.7. Upper pulley,
Metco 4lb lower pulley and stock ring single, Metco 90mm idler pulley,
60lb Siemens Deka EV6 injectors,
Kenne bell Boost a pump
jLT Intake,
BBK Ceramic Long Tube headers,
Off-road X-Pipe
Bassani Cat Back.
SLP loudmouth mufflers.
ShifterSpec Stage 3+ Clutch,
Polyurethane IRS Bushings,
Eibach Springs.
Dual pillar gauge pods Boost and air/fuel digital.
Clear corner lights
Led headlights, fog and corners.

17x9 cobra wheels with nitto 555 front
17x10.5 on rear deep dish with brand new Mickey Thompson drag radials 315/35/17.
Will also come with TWO 17x10 rear wheels with Mickey Thompson e2s with 275S on them.
Have a extra set on black leather seats to go with it also that are also in fantastic shape.

Car runs great and setup only has 71000 miles on it.Car makes 572 rwhp. Car is extremely reliable and can drive it anywhere. Black leather interior.

Id be happy with 15-17K if I were selling it and I am a big big fan of the SN95 body style. Doubt you would get much more without a big blower.
 

Dirks9901

Paint>Vinyl
Established Member
Premium Member
Joined
Aug 31, 2005
Messages
5,033
Location
Colorado
Me personally, I wouldn’t pay a penny over 15k but of course to the right buyer maybe 2-3k more?


Sent from my iPhone using svtperformance.com
 

Beetle6986

Member
Established Member
Joined
May 29, 2004
Messages
616
Location
PA
Im looking to port my blower. Isn’t 572 whp pretty high? I was hoping to get over 500 with a port and 2.7.
 

Users who are viewing this thread



Top